527,928 active members*
2,422 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Any way to use Siemens type "label" function in Fanuc
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jul 2008
    Posts
    9

    Any way to use Siemens type "label" function in Fanuc

    Hello,

    I have used lots of Fanuc and Siemens.
    With Sinumeric I have used a style of programming as follows:

    R1=3 ;MILLING PLANE

    LABEL1:
    G0 X## Y##
    G0 Z=0+R1


    HERE FOR EXAMPLE FACEMILLING PATH


    G0 Z25
    ENDLABEL:

    R1=0.2 ;MILLING PLANE
    REPEAT LABEL1

    This way I only have to edit path in one place even tho repeating it many times.
    Is there a way to do this on Fanuc without using sub programs?

  2. #2
    Member
    Join Date
    Jul 2010
    Posts
    118

    Re: Any way to use Siemens type "label" function in Fanuc

    Hi,

    as you did not specified, for i-series controls, as follows,
    1. after M30, the end of the normal program, you add the next of sequence number ( in sequence),i.e. last number-99, plus 100 = 99+100= 199 > "N199" as long as it is bigger than the last number used.
    2. here you place what you want to do, i.e. ....and end with M99
    3. then you call M98 Q199, this will jump to the numbers sequence number.

    ok, there is a parameter to that allow this, 6005#0=1

    have fun

    call is treated in the same manner as a sub program and the same rules apply;

Similar Threads

  1. Replies: 15
    Last Post: 09-03-2018, 11:30 AM
  2. X Axis "Goes Off Pattern", "Awry", "Skewed", "Travels"
    By DaDaDaddio in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 1
    Last Post: 05-06-2013, 09:59 AM
  3. How to type "#" on a Yang Eagle Fanuc O-MD
    By p_shark in forum Fanuc
    Replies: 3
    Last Post: 02-15-2013, 09:57 AM
  4. "J" head type "millport"(tiwan,1980) clutch
    By marksbug in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 08-17-2009, 04:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •