594,859 active members*
5,080 visitors online*
Register for free
Login
IndustryArena Forum > Community Club House > International / Regional Forums > USA Club House > Buying first CNC router Cosmec Conquest 510
Results 1 to 9 of 9
  1. #1

    Buying first CNC router Cosmec Conquest 510

    Hello all and thank you for taking the time to read this. We are a small commercial cabinet company looking to move into CNC production. We mainly produce typical white melamine cabinets for medical field, and I am spending way too much time behind a saw. I have found what I think to be a great deal on a 2007 Cosmec Conquest 510 in good working order. The machine is still in production at a local shop and I think I can pick it up (with a large dust collector) for $14000. It would probably sit for a year or so as we ready our shop for three phase power (right now our other machines are running off of phase converters) Can anyone give me any advice? Is this a good machine? I am so lost by all of the different options and millions of pages on the internet.
    Thank you you in advance,
    Paul

  2. #2
    Join Date
    Jan 2010
    Posts
    22

    Re: Buying first CNC router Cosmec Conquest 510

    Hello Paul,
    Did you ever purchase that Cosmec? I have one; however, I do not have the operating manuals.

  3. #3

    Re: Buying first CNC router Cosmec Conquest 510

    Yes sir we did. It sat in storage for a while until we could clear enough room for it. Our 3 phase service is in and I am currently waiting for my cutters and dust collection duct work to arrive. We selected a S2M software and I have been learning it. It has been difficult to find time to get everything squared away due to our current work load. I am excited to get the machine up and running, but I am defiantly nervous about service and or repair on the machine. I know holzher was doing service and repair but stopped when they introduced their own CNC's. Any tips or knowledge you can give me would be much appreciated. The guy I purchased it from did all service and repair himself but he is far to busy to come help me out.

  4. #4
    Join Date
    Jan 2010
    Posts
    22

    Re: Buying first CNC router Cosmec Conquest 510

    Paul,
    I would be happy to answer any questions that may arise. You can find my information on my website ArtisticCNC
    Mechanically we are set; however, we need a manual for the control that shows how to load programs, use the MDI, etc.
    Anthony

  5. #5
    [QUOTE=AnthonyOhio;2333850]Paul,
    I would be happy to answer any questions that may arise. You can find my information on my website ArtisticCNC
    Mechanically we are set; however, we need a manual for the control that shows how to load programs, use the MDI, etc.
    Anthony[/QUOTE
    I will see what manuals we have. our machine runs off a desktop. please feel free to give me a call
    980.722.1075

  6. #6

    Re: Buying first CNC router Cosmec Conquest 510

    Quote Originally Posted by AnthonyOhio View Post
    Paul,
    I would be happy to answer any questions that may arise. You can find my information on my website ArtisticCNC
    Mechanically we are set; however, we need a manual for the control that shows how to load programs, use the MDI, etc.
    Anthony
    Anthony,
    I just recently finished our machine set up and was able to get my hands on manuals/ test files/ and all associated info on the machine. I have them on a flash drive if this would help you out, it is a lot of info. Our machine uses a NUM control. I know they were either NUM or one other in the same exact machines. Please let me know if you need a copy of this info.
    Our machine is using PC Panel MMI.

  7. #7
    Quote Originally Posted by pauldavid86 View Post
    Anthony,
    I just recently finished our machine set up and was able to get my hands on manuals/ test files/ and all associated info on the machine. I have them on a flash drive if this would help you out, it is a lot of info. Our machine uses a NUM control. I know they were either NUM or one other in the same exact machines. Please let me know if you need a copy of this info.
    Our machine is using PC Panel MMI.
    Hello, i know this is an older post but i have had a cosmec conquest 510 for a while now and have not been able to get it up and running. I know you mentioned you have all the documentation for it on a flash drive. Any chance you would be willing to share the file?

  8. #8

    Re: Buying first CNC router Cosmec Conquest 510

    Quote Originally Posted by pauldavid86 View Post
    Anthony,
    I just recently finished our machine set up and was able to get my hands on manuals/ test files/ and all associated info on the machine. I have them on a flash drive if this would help you out, it is a lot of info. Our machine uses a NUM control. I know they were either NUM or one other in the same exact machines. Please let me know if you need a copy of this info.
    Our machine is using PC Panel MMI.
    My company bought one of these machines and did not come with a manual or wiring diagrams, would you be willing to send these over that would be very helpful

    thanks

  9. #9
    Join Date
    Nov 2024
    Posts
    2

    Re: Buying first CNC router Cosmec Conquest 510

    Explore the high-performance CNC milling machines at Virmer https://virmer.com/catalog/cnc-milling-machines/, designed for exceptional precision and reliability in production. Our machines enable complex cuts and intricate designs with unparalleled accuracy, reducing errors and increasing efficiency. With a variety of models to suit different industries, these machines are perfect for meeting your specific machining needs. Enhance your manufacturing capabilities and achieve top-quality results with our advanced CNC milling solutions.

Similar Threads

  1. Cosmec Conquest Servo
    By ncarter in forum Commercial CNC Wood Routers
    Replies: 5
    Last Post: 04-28-2020, 07:45 PM
  2. Cosmec Conquest
    By Blisswoodshop in forum Commercial CNC Wood Routers
    Replies: 6
    Last Post: 11-08-2019, 08:41 PM
  3. 2003 Cosmec Conquest 510 Manual Help...
    By DWK in forum Machinery Manuals / Brochures
    Replies: 2
    Last Post: 11-08-2019, 01:20 AM
  4. External Monitor Cosmec Conquest
    By chuckcnc in forum Commercial CNC Wood Routers
    Replies: 1
    Last Post: 02-12-2018, 09:08 PM
  5. Buying a new 48x48 Art-Router 4 Axis CNC Router
    By Stoch in forum Open Source CNC Machine Designs
    Replies: 1
    Last Post: 12-17-2010, 01:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •