Good night guys.

I'm from Mexico so sorry if my english is not proficient enough but...
I need your help with one of my own works, I don't have any idea of RPMs and cutting parameters, the piece area is around 150 mm x 155 mm in aluminium.
I made a desing in Mastercam and export de NC code for a Fanuc 0-MD control but I don't know too much about cutting parameters.
I have 3 processes:
Facing - flat endmill 1/2''
Reducing material - ball endmill 6mm
Final form - taper mill R0.5X20.5X50 D4 tip R=0.5mm of 4 mm ~ 6 mm

I used Mastercam for that and G21 so my inputs are in "mm".

Can you help me with spindle speed and feed rate please?

See the attachments.

Click image for larger version.  Name: 72198ff8-7875-4c69-83d3-72bf28743356 (1).jpg  Views: 0  Size: 60.4 KB  ID: 480487
Click image for larger version.  Name: Captura de pantalla 2022-05-30 231957.jpg  Views: 0  Size: 52.0 KB  ID: 480489
Click image for larger version.  Name: Captura de pantalla 2022-05-30 232055.jpg  Views: 0  Size: 48.7 KB  ID: 480491
Click image for larger version.  Name: d73a494f-7dd6-4946-a0d5-950b10a87fe3 (1).jpg  Views: 0  Size: 62.2 KB  ID: 480493