531,783 active members*
2,571 visitors online*
Register for free
Login

Thread: CNC issues

Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Oct 2020
    Posts
    2

    CNC issues

    Hi I'm new here and haven't been able to find what I'm looking for. I had a Proma SD THC that I was having issues with and decided to remove it for now.. in doing so the way it was wired must have been more complicated then I thought. When I toggle UP /\ it goes DOWN \/ and the same on the opposite direction. I'm looking for some help as I have tried to correct it by swapping the motor wires and it doesn't change the direction. Can anyone give me some help on what I'm doing wrong? I included a Pic and I hi-lighted where the wires go from the BOB to the Driver.
    Attached Thumbnails Attached Thumbnails IMG_0395.jpg  

  2. #2
    Member
    Join Date
    Oct 2020
    Posts
    2

    Re: CNC issues

    Okay so the guys over at PlasmaSpider were bale to help me fix this issue.

    In Mach3 under Cofig/Ports-Pins/Motor-Outputs i was able to change the Dir and this fixed my issue.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •