540,357 active members*
1,051 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > DAEWOO LYNX 210 CLAMP OD/ID QUESTION
Results 1 to 3 of 3
  1. #1

    Join Date
    Oct 2020
    Posts
    12

    DAEWOO LYNX 210 CLAMP OD/ID QUESTION

    Just starting to run my first Daewoo lathe, I have always run Haas. My machine has a Mitsubishi Meldas 64 control. I mounted a dead length 5c collet chuck on it and can't seem to get it to switch clamp OD to ID. The book says to switch parameter 6407 bit 6 to 0/1. I have done this and cant seem to get it to change the recognized clamping direction when I try to run the spindle. Keep getting spindle unclamped status when trying to run with drawtube pushed out which is what I need with dead length chuck. The parameter bit number is changing, I know they are from right to left starting with 0 and ending with 7, and the screen shows that clearly. Need help am I missing something else??? Thanks

  2. #2

    Join Date
    Oct 2020
    Posts
    12

    Re: DAEWOO LYNX 210 CLAMP OD/ID QUESTION

    So I just dug into this a little deeper, the programming book shows the parameter information above, but the parameter book with my machines serial number on it says 6407 bit 6 is a high/low coolant parameter. I can't find one in the parameter bits in the parameter book that says ID/OD clamping. Hopefully someone has run one of these and is familar with it. Thanks

  3. #3
    Member
    Join Date
    Jul 2005
    Posts
    347

    Re: DAEWOO LYNX 210 CLAMP OD/ID QUESTION

    Is there a key switch on the control panel?

Similar Threads

  1. Daewoo Lynx?
    By rpseguin in forum Daewoo/Doosan
    Replies: 3
    Last Post: 06-05-2019, 04:09 PM
  2. DAEWOO LYNX 210A
    By rcs60 in forum Daewoo/Doosan
    Replies: 3
    Last Post: 06-22-2018, 04:49 PM
  3. (HELP) DAEWOO LYNX 200
    By lildave26 in forum Daewoo/Doosan
    Replies: 3
    Last Post: 06-29-2011, 11:40 AM
  4. daewoo lynx 200 (help)
    By lildave26 in forum Daewoo/Doosan
    Replies: 2
    Last Post: 03-09-2011, 04:47 AM
  5. DaeWoo Lynx 200 GL
    By fjd in forum Daewoo/Doosan
    Replies: 5
    Last Post: 10-30-2005, 03:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •