554,027 active members*
2,589 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Dataserver technical info - Fanuc 18MC
Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    May 2022
    Posts
    7

    Dataserver technical info - Fanuc 18MC

    Hi all,
    I am just wondering if anybody can direct me to information regarding the communication protocol between Dataserver and CNC boards, and the pinout of the backplane connectors.

    To clarify, the dataserver board in my 18MC has died. This a home-shop machine and the cost of obtaining a replacement board here in NZ is prohibitively expensive.
    I do embedded programming, so for fun I would like to attempt to interface in something a bit more modern, available and affordable to act as the dataserver, but for that I require said technical info.

    I understand if this is proprietary Fanuc info that no one can give me, but thought I would ask anyway.
    Thanks in advance.

  2. #2
    Registered
    Join Date
    Apr 2009
    Posts
    1306

    Re: Dataserver technical info - Fanuc 18MC

    Send me an email: cnc @tulipmemory.com

  3. #3
    Member
    Join Date
    May 2022
    Posts
    7

    Re: Dataserver technical info - Fanuc 18MC

    Thank you for the reply, I have sent you an email.

  4. #4
    Registered
    Join Date
    Apr 2009
    Posts
    1306

    Re: Dataserver technical info - Fanuc 18MC

    Send the schematics but email won't go through.

  5. #5
    Member
    Join Date
    May 2022
    Posts
    7

    Re: Dataserver technical info - Fanuc 18MC

    Oh darn, that's disappointing. Well thank you for trying. If it's not too much bother may I try again with a different email?

  6. #6
    Registered
    Join Date
    Apr 2009
    Posts
    1306

    Re: Dataserver technical info - Fanuc 18MC

    Done.

  7. #7
    Member
    Join Date
    May 2022
    Posts
    7

    Re: Dataserver technical info - Fanuc 18MC

    Thank you, very much appreciated.

Similar Threads

  1. Need file Fanuc 18Mc Nc-basic
    By Selimsalim in forum Fanuc
    Replies: 27
    Last Post: 12-27-2020, 09:19 AM
  2. Fanuc 15M DataServer Install Help
    By stang623 in forum Fanuc
    Replies: 0
    Last Post: 09-07-2017, 07:41 PM
  3. Fanuc 18MC Question
    By swartling in forum Fanuc
    Replies: 4
    Last Post: 05-03-2011, 07:04 PM
  4. RISK 64 on Fanuc-18MC Controller
    By iNUC in forum Fanuc
    Replies: 0
    Last Post: 09-21-2008, 09:38 AM
  5. Replies: 10
    Last Post: 10-30-2006, 10:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •