540,709 active members*
7,607 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Jan 2007
    Posts
    283

    Delta 1000 Rapid override

    Helping someone out with a Delta 1000 (2005-ish) control on a lathe.
    We don't have a manual so kind of wandering in the dark for settings

    The rapid override switch controls the speed of the movements (I believe there are 3, maybe 4 settings, 100%, 75%, 50 and 25% type of thing) when it's in manual "jog" mode but doesn't have any affect on rapids during a program cycle (G00 moves)

    On another, older machine he has that is running an older version of the control (not 1000. I think it was 20 or 40) the override switch works as I believe it should by limiting the speed in both manual and program modes.

    Before I get into the wiring I was hoping there might be a parameter somewhere (There is the T0 and T1 in settings screen but really that just seems to turn off the switch all together)

    Thanks for any help
    M

  2. #2
    Member
    Join Date
    Aug 2009
    Posts
    895

    Re: Delta 1000 Rapid override

    ...MODE SELECT> 5(SETUP). TM2 or TM4 Enter should enable Rapid Overide

    DJ

  3. #3
    Registered
    Join Date
    Jan 2007
    Posts
    283

    Re: Delta 1000 Rapid override

    Thanks I'll try that.
    (that should allow the switch to slow down rapids during programed moves like I think it should right?)
    M

  4. #4
    Registered
    Join Date
    Jan 2007
    Posts
    283

    Re: Delta 1000 Rapid override

    OK, finally made it over to see the machine in person and it's not what I thought. I think I'd better start a new thread with a better title
    M

Similar Threads

  1. is it possible to override rapid feed ?
    By deadlykitten in forum Okuma
    Replies: 7
    Last Post: 07-23-2019, 03:52 PM
  2. Rapid override
    By MSGMachine in forum Haas Mills
    Replies: 16
    Last Post: 03-28-2011, 01:22 PM
  3. Rapid Override?
    By zman300 in forum Fanuc
    Replies: 21
    Last Post: 02-11-2011, 02:13 PM
  4. fanuc rapid override
    By sdb7311 in forum Mori Seiki lathes
    Replies: 3
    Last Post: 10-21-2009, 07:55 AM
  5. RAPID OVERRIDE
    By CNC_BOB in forum OKK
    Replies: 5
    Last Post: 06-02-2008, 11:34 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •