544,049 active members*
2,007 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1

    dip switch settings

    I am currently converting a G0704 to cnc and I have a KL-5056E Digital Stepper Driver-32 bit DSP Based for the X and Y axis with NEMA23 570oz/in 5A 3/8” Dual Shaft Stepper Motor (KL23H2100-50-4BC). Then a NEMA34 Stepper Motor – 906 oz in 6.1A Dual Shaft (KL34H295-43-8B) with KL-8070D Digital Bipolar Stepper Motor Driver-32 bit DSP Based for the Z axis. I am trying to figure out what I need to set the dip switches to on the drivers. I wired the Z axis motor to be bipolar parallel, and i believe the x and y motors come wired for the same. The x and y motors arrived with the motor cable already installed, the z did not. Everything was purchased from automation technologies. Also I got the aluminum driver/ power supply box from them as well, Do I need to put like a rubber spacer between everything and the box as i mount them?

  2. #2
    Company Representative
    Join Date
    Oct 2005
    Posts
    845

    Re: dip switch settings

    Hi,

    For the KL-5056E dip switch, you can set to 1-8: OFFFFFOO. For the KL-8070D, you can set to 1-8: OFOFFFOO. (O = ON, F = OFF)

    And thick rubber spacer will be necessary to installed between your breakout board and the box.

  3. #3

    Re: dip switch settings

    Awesome Thank you very much!

Similar Threads

  1. Dip Switch and Config Settings Questions
    By aero1310 in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 09-11-2018, 02:57 PM
  2. DC860A Dip switch settings
    By Beachcues in forum Stepper Motors / Drives
    Replies: 11
    Last Post: 02-16-2015, 06:16 PM
  3. Wantai DQ542MA Dip Switch Settings
    By Typefighter01 in forum Stepper Motors / Drives
    Replies: 7
    Last Post: 08-13-2013, 06:56 AM
  4. Dip switch settings for DL-5056D?
    By ddragon in forum Benchtop Machines
    Replies: 2
    Last Post: 11-09-2012, 02:21 AM
  5. API P315L Dip switch settings
    By Tego in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 06-19-2010, 02:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •