535,272 active members*
3,817 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Jul 2003
    Posts
    123

    dip switch settings for 5056 stepper driver

    hello
    I Need to set the
    dip switch settings
    for the 3 KL-8056 Drivers
    https://www.automationtechnologiesin...rivers/kl5056/

    2
    (KL23H2100-50-4B)
    X,Y motors
    https://www.automationtechnologiesin...lat-570-oz-in/

    and
    1
    KL34H280-55-4A
    For Z
    https://www.automationtechnologiesin...-640-oz-in-55/

    pin 4 off for x,y on full current for Z

    direct drive PM-25 Mill

    2nd build

  2. #2
    Registered
    Join Date
    Jul 2003
    Posts
    123

    Re: dip switch settings for 5056 stepper driver

    Franco explanation






    https://www.youtube.com/watch?v=5D7px0r0pUE







    Quote Originally Posted by sidecar82 View Post
    hello
    I Need to set the
    dip switch settings
    for the 3 KL-8056 Drivers
    https://www.automationtechnologiesin...rivers/kl5056/

    2
    (KL23H2100-50-4B)
    X,Y motors
    https://www.automationtechnologiesin...lat-570-oz-in/

    and
    1
    KL34H280-55-4A
    For Z
    https://www.automationtechnologiesin...-640-oz-in-55/

    pin 4 off for x,y on full current for Z

    direct drive PM-25 Mill

    2nd build

  3. #3
    Registered
    Join Date
    Jul 2003
    Posts
    123

    Re: dip switch settings for 5056 stepper driver

    got machine PM-25 cnc conversion moving
    switches

    DO NOT FLIP SWITCHES UNDER POWER
    U will Blow the drive
    No Smoke 2 ?


    set step switches
    5,6,7,&8
    to--- off,off,on,on
    8th step
    stepper motor 20 steps per revolution 1.8 DEG = 200 steps.
    So that 1600 steps per rev

    I thought the ball screws were in inches they are not
    they are metric

    I MDI command X 7 inches machine moves to 6.889 measured
    Display shows 7.0000

    machine moved measured 175 mm=6.889
    stepper motor made 35 turns

    SO to calculate of a metric screw
    turns per inch for a metric ball screw
    7 inches =7*25.4=177.8 mm

    177.8/35=5.08
    so 5.08 = number of turns of the ball screw to
    get inch inch of movement
    hope this help some one ?

    machine now moves the correct distance
    YES 7 inches
    8th step plenty of Power no stall
    forgottoturnonspindlemotor

    end mill pushed part out of vise ?

    still attempting to mill

    been using MDI

    switch 4 set to off (off makes power reduction to on ?)
    123
    for X,Y on off on
    for Z on,off,off

    motors have been on for over a hour and are cool, not even warm!
    and had Power to move

    DO NOT FLIP SWITCHES UNDER POWER
    U will Blow the drive
    No Smoke 2 ?

    OK that all for now

  4. #4
    Registered
    Join Date
    Mar 2018
    Posts
    9

    Re: dip switch settings for 5056 stepper driver

    Thanks for sharing. I'm starting a build to convert a Seig X2D to CNC. When I get to assembly I'll definitely be looking at the relevant formulas.
    My original plan was to convert a little machine shop 3990 mill to cnc so I bought the cnc mechanics and electronics at the same time. My problem is that I like having a manual mill in the shop. I decided instead to buy the Seig for CNC.

    I am interested in where you got the abs case? I've been looking and the closest I found is a metal cabinet used to make electrical connections. If I go that route I'll need to make sure to isolate everything from the case. I also like the aircraft connectors which would mean drilling fairly large holes in the metal case. The plastic case would eliminate those two problems.

Similar Threads

  1. Correct Stepper Motor Driver Board Switch Settings
    By jmsiefer in forum Stepper Motors / Drives
    Replies: 2
    Last Post: 01-27-2014, 05:25 AM
  2. Stepper Driver Settings (Microstep and Current)
    By maximusalto in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 03-09-2013, 04:59 AM
  3. Stepper driver dip switch configuration
    By canadamaxxer in forum Syil Products
    Replies: 0
    Last Post: 03-24-2010, 04:50 AM
  4. Stepper driver settings 1/8 vs 1/2
    By BubbaGump in forum Australia, New Zealand Club House
    Replies: 0
    Last Post: 11-17-2009, 11:46 PM
  5. Keling 5056 Driver Error HELP
    By Cartierusm in forum Automation Technology Products
    Replies: 6
    Last Post: 12-20-2007, 04:54 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •