527,827 active members*
2,244 visitors online*
Register for free
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2008

    DMC200U Speed Monitoring fault

    we have a DMC200U with a I530 Heidenhein control, which kept coming up speed sensor fault, the machine would run ok with linear moves and soon as the spindle came on the brake on the machine would come on with an alarm Speed Sensor inactive, we have had the spindle drive and the encoder changed but now the machine runs fine for about 3 hours and then bangs off with a fault Speed monitor inactive, can anybody throw any light or point us to someone who can solve this issue?

  2. #2
    Join Date
    Jul 2008

    Re: DMC200U Speed Monitoring fault

    Attachment 447482

    sorry, the alarm message is actually 'standstill monitoring err. in x

Similar Threads

  1. Spindle Speed Monitoring
    By rpenido in forum Okuma
    Replies: 2
    Last Post: 08-27-2013, 06:23 PM
  2. 139 x motor z fault and occasional ground fault
    By duckslayer in forum Haas Mills
    Replies: 4
    Last Post: 05-10-2012, 01:50 PM
  3. motor monitoring for fault detection
    By rutman in forum General CNC Machine Related Electronics
    Replies: 1
    Last Post: 08-28-2011, 10:38 AM
  4. Replies: 3
    Last Post: 05-18-2011, 05:26 AM
  5. Seig X3 spindle trouble (speed error, fault light) SOLVED
    By iandh in forum Benchtop Machines
    Replies: 7
    Last Post: 01-21-2010, 03:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts