525,875 active members*
3,055 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Registered
    Join Date
    Apr 2005
    Posts
    1232

    DMM TECH 750 Watt Servo System

    Hey Guys;
    I just listed on ebay a new control system designed around DMM Tech Servos and Dyn2 Drives. They are 750 watt and have been bench tested. After the hard wired bench test, I moved the control system to a control panel and added all connectors. Unfortunately, I have since retired and ran out of steam. The system is at least 80% finished using linuxcnc with the included computer. I just don't want to build the mounts and redesign my old system for the new motors. Heck, I hardly use it anyway.

    Included are the servos, drives, control cards (including the DMM BOB) and a inexpensive pendant that has been wired but not tested. See the add for other details or send me a PM on specifics. It will be a heck of a deal for the right application at a fraction of the new cost.

    Bill



    DMM TECH Control System with 750W Servos 80% | eBay
    billyjack
    Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)

  2. #2
    Registered
    Join Date
    Apr 2005
    Posts
    1232

    Re: DMM TECH 750 Watt Servo System

    bump
    billyjack
    Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)

  3. #3
    Member
    Join Date
    Jan 2005
    Posts
    11275

    Re: DMM TECH 750 Watt Servo System

    Quote Originally Posted by bill south View Post
    Hey Guys;
    I just listed on ebay a new control system designed around DMM Tech Servos and Dyn2 Drives. They are 750 watt and have been bench tested. After the hard wired bench test, I moved the control system to a control panel and added all connectors. Unfortunately, I have since retired and ran out of steam. The system is at least 80% finished using linuxcnc with the included computer. I just don't want to build the mounts and redesign my old system for the new motors. Heck, I hardly use it anyway.

    Included are the servos, drives, control cards (including the DMM BOB) and a inexpensive pendant that has been wired but not tested. See the add for other details or send me a PM on specifics. It will be a heck of a deal for the right application at a fraction of the new cost.

    Bill



    DMM TECH Control System with 750W Servos 80% | eBay
    You most likely are better off completing it and then selling it, you are all most there, there may be someone that wants a build like this but the software may be where the hang up would be not everyone would be into Linuxcnc for there control
    Mactec54

  4. #4
    Registered
    Join Date
    Apr 2005
    Posts
    1232

    Re: DMM TECH 750 Watt Servo System

    Thanks Mac!
    Since this is a linux system about 80% as I've noted and in my experience, that is about as far as one can go w/o having it installed on a machine! Switching it to mach would be very easy with the included dmm bob with a couple of $$ left over in the mesa 7176 and 5i25 cards! I just thought that the price would be the selling factor since I have over $2k in equipment and about 40 hours in labor for someone that wants an easy upgrade to an ac servo system! If it doesn't sell i'll part it out but don't really want to!
    Thanks for the advice though!
    Bill
    billyjack
    Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)

  5. #5
    Member
    Join Date
    Jan 2005
    Posts
    11275

    Re: DMM TECH 750 Watt Servo System

    Quote Originally Posted by bill south View Post
    Thanks Mac!
    Since this is a linux system about 80% as I've noted and in my experience, that is about as far as one can go w/o having it installed on a machine! Switching it to mach would be very easy with the included dmm bob with a couple of $$ left over in the mesa 7176 and 5i25 cards! I just thought that the price would be the selling factor since I have over $2k in equipment and about 40 hours in labor for someone that wants an easy upgrade to an ac servo system! If it doesn't sell i'll part it out but don't really want to!
    Thanks for the advice though!
    Bill
    Yes it is a good price then add in your advertisement that it could be used with any control software like Mach3 Mach4 UCCNC Acorn Etc
    Mactec54

Similar Threads

  1. Replies: 3
    Last Post: 06-28-2018, 05:44 PM
  2. DMM Tech DYN4 cnc servo drives motors cables I/O boards full 3 axis system
    By DennisCNC in forum Newly Posted Classifieds Listings
    Replies: 1
    Last Post: 12-13-2017, 10:07 PM
  3. Filter system for small CO2 laser - 100 watt
    By biederboat in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 2
    Last Post: 02-15-2014, 05:48 PM
  4. We are rebuilding a 600 watt Raytheon GS-600 CO2 system...
    By scrat242 in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 0
    Last Post: 03-24-2011, 09:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •