548,476 active members*
2,930 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1

    dnc for leadwell mcv 1000 ap

    Hello friends
    I have a leadwell mcv 1000ap device with fanuc o-m model f
    Produced in 1990
    In this device, the parameters can be transferred to the device and computer
    The G-code program can also be transferred to the device memory
    But it is not possible to send the program from dnc software such as cimco and run it by the device
    Thank you for your help
    Attached Thumbnails Attached Thumbnails 1.jpg   2.jpg  

  2. #2

    Join Date
    Aug 2019
    Posts
    80

    Re: dnc for leadwell mcv 1000 ap

    Do you see a "Tape" or "DNC" mode selection on the operators panel. The old membrane style panels were nearly impossible to re-label so it is possible an un-labeled button will select DNC/Tape mode.
    You can check the ladder for G127.5. This bit on (1) in conjunction with Auto mode places the control into DNC/Tape mode.

Similar Threads

  1. Leadwell MCV-0
    By dpaulson in forum Fanuc
    Replies: 3
    Last Post: 01-07-2016, 07:39 PM
  2. help with Leadwell MCV-OP
    By prec-tech in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 06-13-2011, 06:34 AM
  3. MCV-OP Leadwell????
    By bdrmachine in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 02-16-2006, 02:35 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •