521,872 active members*
1,857 visitors online*
Register for free
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2020

    Doosan Puma 480 Rapids

    We have run into a problem on one of our Puma 480’s, it seems that our G00 rapid and our G94 seem to have mixed themselves up as in the case of the rapids it seems to be moving using a slow feed whereas when we use the G94 facing cycle straight after it it runs as a rapid feed. Now it ran fine on the 1st part but this happened on the 2nd part. Apparently something similar happened before a few years ago on the machine where instead of moving quickly in the G00 rapid it fed out at a slow feed at the end of the program. Has anyone ever come across this problem before?

  2. #2
    Join Date
    May 2020

    Re: Doosan Puma 480 Rapids

    Did you fix this problem? I think you should consult the experts! bullet force

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts