532,240 active members*
3,689 visitors online*
Register for free
Login
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Apr 2017
    Posts
    4

    Drip feed on a Fanuc 6mb

    Hello All,
    I know its been asked a hundred times and I have read all the threads I can find on the topic, but I still cant figure out the drip feeding of my machine. I have a Fanuc 6mb control. I know the previous owner drip fed it. I have purchased a Mini DNC and it sends small programs fine, but will not drip feed. I don't fully understand the pram G127.5 that has been talked about. If I put my machine selector switch in tape, send the file from the DNC and press cycle start the button lights up and stays lit up, but nothing happens. I feel like a setting in the machine needs turned on but don't know where to start.


    Thank you for any help you can provide!
    Bill Wolkan

  2. #2
    Registered
    Join Date
    Apr 2006
    Posts
    69

    Re: Drip feed on a Fanuc 6mb

    Fanuc 6 use parallel interface for DNC


    Sent from my iPhone using Tapatalk

  3. #3
    Member
    Join Date
    Aug 2009
    Posts
    780

    Re: Drip feed on a Fanuc 6mb


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •