562,565 active members*
3,434 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2021
    Posts
    3

    Dust hood and tool carousel

    I have a CNC router with a twelve position tool carousel and a dust hood. It seems to me that the dust hood can only be activated with certain tools, however, I'm not sure and I don't know how to check. I've tried through g-code and manually with the buttons. Any help is appreciated.

  2. #2
    Member
    Join Date
    Aug 2021
    Posts
    3

    Re: Dust hood and tool carousel

    Is there a database that allows or disallows functions based on tools? If so, where would I look for it?

  3. #3

    Re: Dust hood and tool carousel

    it should be have setup in system ,is your system Syntec . each factory have differnt m code to control dust hood up down .

  4. #4
    Member
    Join Date
    Aug 2021
    Posts
    3

    Re: Dust hood and tool carousel

    It's Fanuc. We have M93 down, M94 long down, M95 up.
    It looks like the dust hood will only activate with certain tools. I would like to be able to change that.
    I don't know where that would be. There must be a list or something.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •