549,843 active members*
2,295 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Fadal > Fadal 5 axis, trouble with B axis/possible dnc
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Dec 2015
    Posts
    13

    Fadal 5 axis, trouble with B axis/possible dnc

    We just got out 5 axis fadal 4020 home, it has a 88hs control. We are using multi dnc to send g code. We struggle to get multi dnc to work, but found We had to delete the information that it was adding to the start of the code, and add "dnc" to the start of the code. Our code is in absolute, and we are having a strange problem, when it calls to move the B axis, it goes past where is should be and will try to crash into the table. Any suggestions or experiences would be a great help.

  2. #2
    Registered
    Join Date
    Feb 2006
    Posts
    983

    Re: Fadal 5 axis, trouble with B axis/possible dnc

    Quote Originally Posted by sledhead306 View Post
    We just got out 5 axis fadal 4020 home, it has a 88hs control. We are using multi dnc to send g code. We struggle to get multi dnc to work, but found We had to delete the information that it was adding to the start of the code, and add "dnc" to the start of the code. Our code is in absolute, and we are having a strange problem, when it calls to move the B axis, it goes past where is should be and will try to crash into the table. Any suggestions or experiences would be a great help.

    Never use Fadal before, but Use to run Haas and there is support a option is the setting you should turn on while machine run. Any B axis move beyond the setting will get alarm.
    The best way to learn is trial error.

Similar Threads

  1. Trouble cutting circles. Trouble with y-axis
    By chrisv7 in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 2
    Last Post: 06-08-2016, 09:43 PM
  2. A Axis Trouble
    By Jam10207 in forum Community Club House
    Replies: 0
    Last Post: 09-18-2013, 08:17 PM
  3. trouble with x and y axis
    By racerx81 in forum Mach Software (ArtSoft software)
    Replies: 0
    Last Post: 09-02-2013, 09:08 PM
  4. X-axis trouble
    By sihtamsivart in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 11-07-2012, 12:35 AM
  5. Axis trouble...
    By Squid in forum Mach Mill
    Replies: 1
    Last Post: 08-01-2012, 06:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •