584,871 active members*
5,544 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2007
    Posts
    793

    Fanuc 0TB peck rigid tapping

    Don't know how to perform face peck rigid tapping cycle in lathe.
    When I use G84 in milling machine I can input Q-word which determines the depth of each step, but G84-command format in lathe doesn't have got Q-word.
    If I use G84 several times one by one does it match with thread start point on each step?

  2. #2
    Join Date
    Feb 2006
    Posts
    1792

    Re: Fanuc 0TB peck rigid tapping

    This is an option.
    If available on your machine, rigid tapping can be invoked by M29.
    There is a parameter method also.(5200#0 = 1 on i-series controls).

Similar Threads

  1. Rigid tapping with peck
    By derek in forum UCCNC Control Software
    Replies: 3
    Last Post: 10-21-2015, 11:15 AM
  2. Fanuc OM Rigid Tapping
    By Saumurea in forum Community Club House
    Replies: 0
    Last Post: 09-23-2013, 07:39 PM
  3. Fanuc OTC rigid tapping help
    By 47MLB in forum Fanuc
    Replies: 13
    Last Post: 03-07-2010, 06:24 PM
  4. Peck Tapping (Rigid)
    By Rekd in forum Haas Mills
    Replies: 43
    Last Post: 12-02-2005, 12:51 PM
  5. Peck Tapping (rigid)
    By Gitanes in forum MetalWork Discussion
    Replies: 0
    Last Post: 11-22-2005, 04:21 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •