[forhire]

This morning I made a backup of my parameters and noticed the backup file doesn't appear to contain any 900 option parameters. This is the method I used:

CNC Go into EDIT mode.
CNC Press ESTOP.
CNC Press the <, SERVICE, CHAPTER, PARAMETER, >, READ, ALL keys.

What do I need to do to view/punch my 900 option parameters on a 15M? On the 0T I hold down the EOB but not sure on this machine.

[forhire]

Never mind. I have it sorted. I pulled out my hard copy parameters and realized the 15M uses 9000 parameters. My backup is good.

[Alirnjbryan]

Is there any one have fanuc 15 parametr backup send to me????????

- - - Updated - - -

Never mind. I have it sorted. I pulled out my hard copy parameters and realized the 15M uses 9000 parameters. My backup is good.

Please sent it to me

[alexfanuc]

Never mind. I have it sorted. I pulled out my hard copy parameters and realized the 15M uses 9000 parameters. My backup is good.

You still have to make a backup of the PMC PARAMETERS. And also, any 9000 programs if the machine has . Do not forget.

Regards

Alex Fanuc

[Alirnjbryan]

You still have to make a backup of the PMC PARAMETERS. And also, any 9000 programs if the machine has . Do not forget.

Regards

Alex Fanuc

Every parameter are delete and every one is zero please help

[alexfanuc]

Every parameter are delete and every one is zero please help

What kind of machine do you have? Machine manufacturer name? Model of the machine? Serial number if you have?
Is it a 15 control?

regards


Alex FAnuc