549,843 active members*
2,977 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 15m pallet ready not working
Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    May 2021
    Posts
    6

    Fanuc 15m pallet ready not working

    Hi! After a ram parity error i have now re-entered all of the parameters, macros and programs that was lost. But for some reason the M60 command will not work, i have noticed that the "pallet ready" button doesn't do anything, it's supposed to light up and start the pallet change.

    Are there any settings or parameters etc. regarding this i could have missed? This worked fine before the machine was reset.

  2. #2
    Registered
    Join Date
    Apr 2009
    Posts
    1266

    Re: Fanuc 15m pallet ready not working

    Did you restore the PMC parameters?

  3. #3

    Join Date
    Aug 2019
    Posts
    86

    Re: Fanuc 15m pallet ready not working

    A couple of things you can look at as a basic starting point.

    Parameter area 7071- 7089. Look to see if any value is set to 60. This would indicate that the M60 called a macro sub and there may be an issue there. It may also be a case where a parameter here is not set that should be.
    Confirm PMC parameter settings. There is really nothing in the NC area for M60 or APC in general (other than macro or sub) as that is 100% logic driven.
    Look in the ladder to determine where the issue lies.

Similar Threads

  1. Pallet Changer Not Working
    By camdb in forum Mori Seiki Machines
    Replies: 4
    Last Post: 10-03-2021, 02:58 AM
  2. Replies: 1
    Last Post: 02-05-2020, 05:59 PM
  3. Fanuc OMC and Fanuc 15M Macro Help
    By stang623 in forum Fanuc
    Replies: 11
    Last Post: 05-01-2016, 03:02 PM
  4. Matsuura Horiz Pallet Ready Switch Help
    By haastec in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 06-22-2012, 06:27 PM
  5. Replies: 5
    Last Post: 10-17-2008, 02:15 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •