[Stockporthdi]

Hi everyone,

first post here but very impressed with the level of knowledge you all have.

so I am a complete newbie with cnc machine but I have been messing around with our Seiki 4ne cnc and I am nearly there with it.

i am having trouble with posting a programme to the machine, i hit send with ConnectCNC and press read on the lathe after a short while it comes up with error 075 EDIT. cant seem to get past this fault.

this is the code im sending;

%
O1001
N10G90G94G18
N11G21
N12G92S750
N13G28U0.
N14G28W0.

(FACE3)
N15T0101
N16G90G95G18
N17G54
N18M8
N19G97S566M3
N20G0X60.Z0.
N21G92S750
N22G96S107M3
N23G0Z-2.106
N24X40.
N25G1X32.828F0.127
N26X30.Z-3.52
N27X-1.587
N28X1.241Z-2.106
N29G0X60.
N30Z0.
N31G97S566M3

(PROFILE ROUGHING2)
N32G0X50.Z0.
N33G92S750
N34G96S107M3
N35G0Z-3.025
N36X29.376
N37G1X27.619F0.127
N38Z-27.243
N39X29.994
N40X31.994Z-26.243
N41G0Z-3.025
N42X29.376
N43G1X25.238F0.127
N44Z-27.243
N45X27.619
N46X29.619Z-26.243
N47G0Z-3.025
N48X29.376
N49G1X22.856F0.127
N50Z-27.243
N51X25.238
N52X27.238Z-26.243
N53G0Z-3.025
N54X20.475
N55G1Z-27.243F0.127
N56X22.856
N57X24.856Z-26.243
N58G0Z-3.025
N59X18.094
N60G1Z-19.98F0.127
N61X19.27
N62Z-26.713
N63X19.177Z-27.243
N64X20.475
N65X22.475Z-26.243
N66G0Z-3.025
N67X15.712
N68G1Z-19.98F0.127
N69X18.094
N70X20.094Z-18.98
N71G0Z-3.025
N72X13.331
N73G1Z-12.759F0.127
N74X14.1Z-13.144
N75Z-19.98
N76X15.712
N77X17.712Z-18.98
N78G0Z-3.025
N79X10.95
N80G1Z-11.569F0.127
N81X13.331Z-12.759
N82X15.331Z-11.759
N83G0Z-3.025
N84X9.734
N85G1Z-4.461F0.127
N86X10.9Z-5.044
N87Z-11.544
N88X10.95Z-11.569
N89X12.95Z-10.569
N90G0Z-3.025
N91X8.518
N92G1Z-3.852F0.127
N93X9.734Z-4.461
N94X11.734Z-3.461
N95G0X50.
N96Z0.
N97G97S679M3

(PROFILE FINISHING1)
N98G0X50.Z0.
N99G92S750
N100G96S107M3
N101G0Z-1.852
N102X9.822
N103G1X8.235F0.127
N104Z-3.852
N105X10.235Z-4.852
N106G3X10.7Z-5.414I-0.561K-0.561
N107G1Z-11.585
N108X13.435Z-12.952
N109G3X13.9Z-13.514I-0.561K-0.561
N110G1Z-20.08
N111X17.483
N112G3X19.07Z-20.874K-0.794
N113G1Z-26.674
N114X19.064Z-26.743
N115X18.976Z-27.243
N116X21.548Z-28.775
N117X33.98
N118G0X50.
N119Z0.
N120G97S679M3
N121M9
N122G28U0.
N123G28W0.

(PART1)
N124M1
N125T0303
N126G90G95G18
N127G54
N128M8
N129G97S750M3
N130G0X50.Z-30.38
N131G92S750
N132G96S200M3
N133G1X-0.08F0.5
N134X50.
N135G97S750M3

N136M9
N137G28U0.
N138G28W0.
N139M30
%

any help would be amazing.

[cncmakers001]

Your program includes N block numbers like N10, N11, etc.
While this is often fine, the 6T controller might prefer to omit these.
Try removing the N numbers and posting the program again.

[Stockporthdi]

thanks for the advice, so I have tried removing all the line number and this didn't work, same fault. and I have tries using an Asterix at the end of ach code for the EOB and this hasn't worked either. I'm at my wits end with this now, so close.