547,434 active members*
2,084 visitors online*
Register for free
Login

Thread: fapt ladder

Results 1 to 5 of 5
  1. #1

    Join Date
    Feb 2020
    Posts
    3

    fapt ladder

    Hello engineers. PLZ HELP!!!

    I'm looking for FAPT LADDER as below part number;
    A08B-9201-J501 and A08B-9201-J502

    I want to edit a ladder on FANUC 18m control,
    Thank you,

  2. #2

    Join Date
    Aug 2019
    Posts
    69

    Re: fapt ladder

    What series of 18?

    The 18A uses an Eprom to store the ladder and you would also need a reader to read and then re-burn an Eprom. The 18B and 18i series went to flash rom.
    If it is an i series the onboard edit function may be available depending on what options are included in the control (c language).
    In addition to fapt ladder there is an edit card (PMCIA card) that can be used to edit ladders on the B and i series.

  3. #3

    Join Date
    Feb 2020
    Posts
    3

    Re: fapt ladder

    Only written on the control 18-m

    There is a PCMCIA card slot on the motherboard, but I need S-RAM to backup the ladder, which is not available to me.
    I want to do this through I/O SCREEN and RS232 port.
    Attached Thumbnails Attached Thumbnails WhatsApp Image 2021-09-17 at 20.25.27.jpeg  

  4. #4

    Join Date
    Aug 2019
    Posts
    69

    Re: fapt ladder

    The version software you are requesting is very old. If memory serves it requires DOS. It may run on an XP machine as long as it has DOS emulation. I don't know if any of the DOS emulators will work for this either.
    Hopefully someone else may be able to add more to aid you.

    If you happen to have an older PC that has DOS or runs the older software hold on to it as its gold in supporting these older controls.

  5. #5
    Registered
    Join Date
    Dec 2015
    Posts
    108
    Quote Originally Posted by oetkbyentc View Post
    The version software you are requesting is very old. If memory serves it requires DOS. It may run on an XP machine as long as it has DOS emulation. I don't know if any of the DOS emulators will work for this either.
    Hopefully someone else may be able to add more to aid you.

    If you happen to have an older PC that has DOS or runs the older software hold on to it as its gold in supporting these older controls.
    I have software contact me on fschematics@gmail.com.

Similar Threads

  1. Fapt Ladder
    By tmbruno28 in forum Fanuc
    Replies: 3
    Last Post: 12-10-2019, 10:54 AM
  2. Fapt ladder?
    By landslide1 in forum Fanuc
    Replies: 27
    Last Post: 05-12-2018, 09:58 PM
  3. FAPT LADDER WANTS
    By iNUC in forum Fanuc
    Replies: 0
    Last Post: 10-14-2009, 05:57 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •