I complete a simple project with 2 cutting operation, but only the second operation gets executed by the machine. I have tried a couple of small programs with multiple toolpaths, but only the second one is executed. I'm using hobby version of 360 on a Onefinity machine. Any help would be appreciated. Thanks
Results 1 to 5 of 5
-
11-20-2022, 04:15 PM #1
- Join Date
- Nov 2022
- Posts
- 3
Fusion 360 only cutting 1 toolpath
-
11-20-2022, 07:46 PM #2
- Join Date
- Jun 2021
- Posts
- 105
Re: Fusion 360 only cutting 1 toolpath
Are you using different tools in the tool paths? Are you selecting both tool paths when you post process?
I have a Woodworker X50
-
11-20-2022, 07:50 PM #3
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5717
Re: Fusion 360 only cutting 1 toolpath
Are you actually posting both toolpaths? To post, right click on the Setup1 and select Post Process, that should post both operations.
Jim Dawson
Sandy, Oregon, USA
-
11-20-2022, 08:13 PM #4
- Join Date
- Nov 2022
- Posts
- 3
Re: Fusion 360 only cutting 1 toolpath
Ah, Thanks guys. I was selecting post from the top icon, but I will try the right click method. Thanks
-
11-20-2022, 08:57 PM #5
- Join Date
- Nov 2022
- Posts
- 3
Re: Fusion 360 only cutting 1 toolpath
That was it. Thanks again.
Reply With Quote
Similar Threads
-
NUBIE needing some help. toolpath for concave cut in fusion 360
By kansaswoodrat in forum Autodesk CAMReplies: 3Last Post: 10-04-2020, 02:36 PM -
Toolpath precision issues from fusion 360
By GeoffreyP in forum Autodesk CAMReplies: 8Last Post: 05-29-2019, 08:18 PM -
Saturn, cutting trivets with Fusion 360 3D Adaptive Clearing
By difalkner in forum FineLine AutomationReplies: 3Last Post: 12-23-2018, 04:25 AM -
fusion 360 plasma cutting option to mach3
By mthboards in forum Autodesk CAMReplies: 2Last Post: 07-04-2017, 03:08 PM -
Can I use Fusion 360 to produce sectioned (sliced) cutting files
By Bob_s in forum Autodesk CAMReplies: 1Last Post: 01-07-2016, 04:11 AM
Tags for this Thread
Posting Permissions
