Hi guys,
im using a phoniex lathe with fanuc Oi-tc control.
I'm trying to do a pocket for one of the better terms.
code is similar to this
G0 x121. z4.0
g71 u r
g71 p q u w f
n10 go x65.0
go1 zo.o5
go1 x75.0 r2.2
go1 z-10.0
g02 x67.4 z-15.0 r18.8
g02 x105 z-30. r18.8
go1 x115.1r2.2
z-33.
ect
machine does everything properly except for the step down after z-10. it tries to do it in one cut.
the conversational on the lathe is rediculess.
any help would be great thanks.
i have tried splitting the radius up into two canned cycels but same thing.
I've never expirenced this before