525,429 active members*
2,043 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hardinge Lathes > HARDINGE CHNC 1 WIRING SCHEMATIC
Results 1 to 12 of 12
  1. #1
    Registered
    Join Date
    Aug 2012
    Posts
    126

    HARDINGE CHNC 1 WIRING SCHEMATIC

    Hi All,

    Can anyone help? I am looking for a wiring diagram/schematic for a HARDING CHNC 1 with a general numeric control (1980's machine) I think the drawing
    number is CC-8220-1? not exactly sure, I have searched everywhere on the brilliant CNCzone website but cannot find anything.

    I am willing to pay for these drawings/manuals via Paypal or other, if they can be copied and sent by e-mail or as an attachment even better!

    Fingers crossed!

    Thanks!

  2. #2
    Junior Member
    Join Date
    Sep 2010
    Posts
    195

    Re: HARDINGE CHNC 1 WIRING SCHEMATIC

    Mr. Moonman5,

    I have these schematics and would be happy to email them to you. Please send an email to torinwalker@gmail.com and I'll fire them off. I have prettty much every single piece of information about this lathe, so let me know if you need anything else.

    Incidentally, I am on the lookout for manuals (originals or PDFs) of the Hardinge Conquest T42 (~1997) - if you know someone with this lathe and could return the favour, I would be immensely grateful.


    Torin...

  3. #3
    Registered
    Join Date
    Aug 2012
    Posts
    126
    Quote Originally Posted by torinwalker View Post
    Mr. Moonman5,

    I have these schematics and would be happy to email them to you. Please send an email to torinwalker@gmail.com and I'll fire them off. I have prettty much every single piece of information about this lathe, so let me know if you need anything else.

    Incidentally, I am on the lookout for manuals (originals or PDFs) of the Hardinge Conquest T42 (~1997) - if you know someone with this lathe and could return the favour, I would be immensely grateful.


    Torin...
    Hi Torin,
    Thank you for your reply, (only just seen your message) the schematics
    Will be a godsend! and very helpful, I cannot thank you enough,
    And of course yes I hope I can help in finding what you need as well,
    My e-mail address is: allen.venus1@btopenworld.com

    Once again thank you I am very great full!

    Allen allen.venus1@btopenworld.com

  4. #4
    Junior Member
    Join Date
    Sep 2010
    Posts
    195

    Re: HARDINGE CHNC 1 WIRING SCHEMATIC

    Quote Originally Posted by moonman5 View Post
    Hi Torin,
    Thank you for your reply, (only just seen your message) the schematics
    Will be a godsend! and very helpful, I cannot thank you enough,
    Allen, it's no trouble at all. I have emailed the 8MB PDF file to the email address you gave me. This schematic is nice - not only does it show all the electrical, but details the air and lube systems too.

    I printed mine (stretched to the edges) on 11x17 which folds nicely into the back of the parts manual.


    Torin...

  5. #5
    Junior Member
    Join Date
    Sep 2010
    Posts
    195

    Re: HARDINGE CHNC 1 WIRING SCHEMATIC

    Looks like I replied to the automailer and it bounced. Sent it again, this time to the address you specified in the message.


    Torin...

  6. #6
    Registered
    Join Date
    Mar 2011
    Posts
    10

    Re: HARDINGE CHNC 1 WIRING SCHEMATIC

    I know this is an old post but I am hoping this diagram is still floating around and details the com port. If so could I please please please get a copy.

  7. #7
    Junior Member
    Join Date
    Sep 2010
    Posts
    195

    Re: HARDINGE CHNC 1 WIRING SCHEMATIC

    Quote Originally Posted by oldmanmike View Post
    I know this is an old post but I am hoping this diagram is still floating around and details the com port. If so could I please please please get a copy.
    No problem, Mike. See the attached PDF. Should have uploaded earlier.


    Torin...

  8. #8
    Registered
    Join Date
    Apr 2015
    Posts
    17

    Re: HARDINGE CHNC 1 WIRING SCHEMATIC

    Hey guys,

    I just acquired a chnc1 and too am in need of some more documentation! Is the file that is upload in this thread all the files you have? thanks

    Also I plan to part out a lot of the electronics and do a retrofit. if anyone is interested in buying parts from me let me know! I also have the Allen Bradley computer that came with it.

    Thanks,

    Mike

  9. #9
    Registered
    Join Date
    Aug 2017
    Posts
    3
    Hi dear ...
    I see you really help someone in through this forum
    Really I feel very happy to see this.
    I am also searching for such wiring diagrams
    But I am failed to get such real manuals.
    I need hardinge conquest t65 schematic or wiring manual.
    Now I can hope somebody help me.
    Plz help for wiring manual.
    Thanks

  10. #10
    Junior Member
    Join Date
    Sep 2010
    Posts
    195

    Re: HARDINGE CHNC 1 WIRING SCHEMATIC

    Quote Originally Posted by Abdullah03186 View Post
    Hi dear ...
    I see you really help someone in through this forum
    Really I feel very happy to see this.
    I am also searching for such wiring diagrams
    But I am failed to get such real manuals.
    I need hardinge conquest t65 schematic or wiring manual.
    Now I can hope somebody help me.
    Plz help for wiring manual.
    Thanks
    I'm sorry, but I don't have wiring diagrams for anything other than the machine I own, which is now a Conquest T42. The CHNC1 and any paper wiring diagrams I had for it are now with its new owner.

    As for your T65, I suggest you call Hardinge with your Machine information (especially serial number) and they will be able to provide the wiring diagrams you need.


    Torin...

  11. #11
    Junior Member
    Join Date
    Feb 2016
    Posts
    4

    Re: HARDINGE CHNC 1 WIRING SCHEMATIC

    Sorry for reviving an old thread but does anyone by chance have schematics for the CHNC 2?

    I have not been able to find any and Hardinge won't give them up/don't have them anymore?

    Thank you,
    Caleb

  12. #12
    Registered
    Join Date
    Oct 2006
    Posts
    93

    Re: HARDINGE CHNC 1 WIRING SCHEMATIC

    Hello, Do you have an operation manual for CHNC with a Fanuc GN6T control ?

Similar Threads

  1. Pneumatic Schematic need it for a CHNC I
    By rencar in forum Hardinge Lathes
    Replies: 1
    Last Post: 02-12-2017, 04:18 PM
  2. Hardinge CHNC 1 with Hardinge Bar Feeder Trouble
    By GreyFox24 in forum Hardinge Lathes
    Replies: 9
    Last Post: 07-31-2015, 05:15 AM
  3. Found Schematic #CN-0008220-02 for CHNC AC signals
    By torinwalker in forum Hardinge Lathes
    Replies: 7
    Last Post: 03-13-2013, 12:14 PM
  4. HARDINGE CHNC II
    By MadMan5000 in forum DNC Problems and Solutions
    Replies: 1
    Last Post: 02-21-2009, 06:00 PM
  5. Hardinge CHNC ?
    By KevinCram in forum Community Club House
    Replies: 0
    Last Post: 10-20-2007, 02:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •