584,846 active members*
3,896 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Bridgeport Machines > Help needs in haidenhain TNC 151
Results 1 to 9 of 9
  1. #1
    Join Date
    Apr 2006
    Posts
    85

    Help needs in haidenhain TNC 151

    Hi
    I have problem in TNC 151. Machine axis goes to reference point normal but after reference it vibrates heavy and gross positioning error.
    Any kind of help appreciate.
    M. Shabbir Mughal

  2. #2
    Join Date
    Jan 2005
    Posts
    1121

    Re: Help needs in haidenhain TNC 151

    Probably tach needs adjusting
    what machine is it on with which servo drives?

  3. #3
    Join Date
    Apr 2006
    Posts
    85

    Re: Help needs in haidenhain TNC 151

    Quote Originally Posted by gus View Post
    Probably tach needs adjusting
    what machine is it on with which servo drives?
    all axis.
    if i change control then normal.

  4. #4
    Join Date
    Jan 2005
    Posts
    1121

    Re: Help needs in haidenhain TNC 151

    You response makes no sense

    No one can help if you do no give information

  5. #5
    Join Date
    Apr 2006
    Posts
    85

    Re: Help needs in haidenhain TNC 151

    Quote Originally Posted by gus View Post
    You response makes no sense

    No one can help if you do no give information
    hi
    what type info u need?
    all axis have huge vibration.
    when going to ref its normal. after ref complete motor vibrate and gross positioning d error.
    i checked all axis separately.

  6. #6
    Join Date
    Jan 2005
    Posts
    1121

    Re: Help needs in haidenhain TNC 151

    SO repeat yourself without answering the questions asked
    What machine and what servo amps

    When homing the control just puts out a set voltage to move the axis in a direction. It does not close the positioning loop until it hits the trip dog for the axis position. Your machine cannot control the position loop, tach adjustment, gain adjustment,

    Start by answering the questions

    Also, has this machine run for you before,?
    Did you lose the parameters?

  7. #7
    Join Date
    Apr 2006
    Posts
    85

    Re: Help needs in haidenhain TNC 151

    Quote Originally Posted by gus View Post
    SO repeat yourself without answering the questions asked
    What machine and what servo amps

    When homing the control just puts out a set voltage to move the axis in a direction. It does not close the positioning loop until it hits the trip dog for the axis position. Your machine cannot control the position loop, tach adjustment, gain adjustment,

    Start by answering the questions

    Also, has this machine run for you before,?
    Did you lose the parameters?
    hi
    yes i know all that for this controller. when it goes to close loop it will in problem. i have checked the teco and adjusted but same . and also set the gain in parameter n on drive. but same
    tr one more tomorrow then update here the results.

  8. #8
    Join Date
    Jun 2017
    Posts
    5

    Re: Help needs in haidenhain TNC 151

    Quote Originally Posted by moghul View Post
    hi
    yes i know all that for this controller. when it goes to close loop it will in problem. i have checked the teco and adjusted but same . and also set the gain in parameter n on drive. but same
    tr one more tomorrow then update here the results.

    how to resolve that?
    i have thesame problem. but no have original parametrs.

  9. #9
    Join Date
    Jan 2005
    Posts
    1121

    Re: Help needs in haidenhain TNC 151

    I realize both the posters here that English is not your first language

    But

    What machine?


    This is minimum information

    If you cannot communicate, take pictures

    Parameters are the only thing that tells the control how to run, whether it is a toaster or a color TV or a vertical mill. They are not optional, the machine cannot run at all without the correct parameters

Similar Threads

  1. Haidenhain 410PA
    By Edvardas in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 09-29-2016, 09:43 AM
  2. Haidenhain itnc530
    By cshas3 in forum Solidworks
    Replies: 2
    Last Post: 02-08-2012, 03:29 AM
  3. Gildemeister Haidenhain CTX500E
    By MAHO700 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 2
    Last Post: 08-08-2011, 06:14 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •