543,736 active members*
2,111 visitors online*
Register for free
Login
IndustryArena Forum > General Manufacturing Processes > Turning > Help with a Fanuc OT - dry run
Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Apr 2020
    Posts
    2

    Unhappy Help with a Fanuc OT - dry run

    Hi, i'm new to this forum.

    We have a Miyano lathe machine with Fanuc OT controller. we have a problem we cannot run axies in automatic mode while spindle is on (M03 S1500) until we turn on the dry run. When we try to run a interpolation (like G1, G2 or G3) the axis don't move just with dry run activated.


    I wish you can help me to solve my problem.

  2. #2
    Member
    Join Date
    Aug 2009
    Posts
    976

    Re: Help with a Fanuc OT - dry run

    ..check Clamping for Chuck...Inside or Outside Safety switch.

  3. #3
    Registered
    Join Date
    Sep 2007
    Posts
    7

    Re: Help with a Fanuc OT - dry run

    also, check in the screen the actual rpm. if you dont have rpm the spindle encoder may be bad.

  4. #4
    Member
    Join Date
    May 2021
    Posts
    5

    Re: Help with a Fanuc OT - dry run

    Does anyone know how i can get it to "peck" drill? https://themultiplicationtable.com/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •