545,780 active members*
2,291 visitors online*
Register for free
Login
IndustryArena Forum > General Manufacturing Processes > Milling > Help with Novusun NVUM V2 USB control card bin file
Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Aug 2019
    Posts
    7

    Question Help with Novusun NVUM V2 USB control card bin file

    Hi

    I been following a problem with nvcb4 that I have

    I bought this card from a local supplier

    and the I install everything and my controller was working fine almos ready to go

  2. #2
    Member
    Join Date
    Aug 2019
    Posts
    7
    and I check the Novusun page and I download the bin file to update the firmware on card . with mach3 under plugin control and activation screen after press the config yellow button on my Novusun-Novusun-pluin-ver-3.0b a diag screen popup and then there is possible to update the card firmware by selected the *.bin file . so after update the bin file the usb communication with the NVNC4 card stop working.

  3. #3
    Member
    Join Date
    Aug 2019
    Posts
    7
    so I been checked and talkin with my supplier and I did a lot things, from reinstall the mach3, use another computer, and install again the mach3 , but not work any more,

    I been trying to contact novusun firma directly but not look

    after a time I start to go deep and I found that is possible to connect the Pc to microcontroller (uC) and download the bin file through the service port on the microcontroller

    si I made the right setup to hook my pc through the uC Jtag port and works , I can read and flash the uC

    so i proceeded to save the original bin file and after I reflash the uC with the bin file form Novusun home page. and i test and still not working the USB communication between the PC and the NVCM4 Card, trougt USB port♂️

    so I guess that I need some help, Is there some one that have the Novusun info to contact them , or Is there someone that already get this issue and fix it.

    Thank you.
    Xi

  4. #4

    Join Date
    Oct 2018
    Posts
    1

    Re: Help with Novusun NVUM V2 USB control card bin file

    Hello, I have the same problem,
    one day the mach3 asked me for the bin and I couldn't get anything if I didn't give it to him,
    I looked for it on the NOVUSUN website, I downloaded it,
    * and the same thing happened to me when updating the bin,
    The pc stopped communicating with the controller.
    * have you been able to fix it?
    thanks for everything and everyone in advance

  5. #5
    Member
    Join Date
    Oct 2019
    Posts
    4

    Re: Help with Novusun NVUM V2 USB control card bin file

    hi
    the same problem,the usb communication with the NVNC4 card stop working. some solution?

  6. #6
    Registered
    Join Date
    Nov 2013
    Posts
    1220

    Re: Help with Novusun NVUM V2 USB control card bin file

    Hi,

    the same problem,the usb communication with the NVNC4 card stop working. some solution?
    Yes there is, buy a decent US or European controller, the Chinese made stuff does not work as advertised and you'll get no manufacturer support.

    Craig

  7. #7

    Join Date
    May 2021
    Posts
    2

    Re: Help with Novusun NVUM V2 USB control card bin file

    Hi thats,
    were you able find a solution and fix the problem?

  8. #8

    Re: Help with Novusun NVUM V2 USB control card bin file

    Hi Rcortada,
    Do you still have the bin file that you download from there website because i try to to download but it not there anymore.
    Thank you,

  9. #9
    Member
    Join Date
    Jun 2021
    Posts
    3

    Re: Help with Novusun NVUM V2 USB control card bin file

    Hello do you solve .bin problem? how?

  10. #10
    Member
    Join Date
    Jul 2021
    Posts
    2

    Re: Help with Novusun NVUM V2 USB control card bin file

    hello someone know how to resolve the problem or have the nvum file? i make a mistake i toke the update program and updated with the wrong model i have nvum v2 and i updated with the Uc300 nvum and im noob im starting and how can i resolve this?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •