534,976 active members*
3,496 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Uncategorised MetalWorking Machines > Hitachi Seiki Service and Support!!!!!!!!1
Page 1 of 9 123
Results 1 to 20 of 180
  1. #1
    Registered
    Join Date
    Nov 2004
    Posts
    36

    Exclamation Hitachi Seiki Service and Support!!!!!!!!1

    Hello all out there lost in the confusion of trying to find support for your Hitachi Seiki machines. I own a CNC Service Company in Wichita Kansas working on all brands of machines, but specializing in Hitachi Seiki. I currently have over 10 gig of info on Hitachi Seiki machines in my database from machine software to procedures and ELECTRICAL MANUALS!!!!! I have years of experience working with these machines, and until June of 04 I worked for Mori Seiki in LA as the Hitachi Seiki specialist. We DO travel, and my hourly rate for shop labor is only $75.00 per hour no matter what state your in. I also do phone support and provide procedures at $45.00 per hour 1 hour min....If you have a Hitachi Seiki machine, other machine models welcome also, call us and we will be happy to help!!! (cureing your headaches is free!!)

    You can contact us at 316-744-0549 just ask for Josh, aka Hitachi_man

    well be looking forward to hearing from you!!!

  2. #2
    Registered
    Join Date
    Mar 2005
    Posts
    5
    Hi Hitachi Seiki_Man
    I Have Hitachi Seiki Va 40 Can You Help Me Look For Manual.
    I live in orange county california
    Thank You

  3. #3
    Registered
    Join Date
    Nov 2004
    Posts
    36

    Manual

    What controls?

  4. #4
    Registered
    Join Date
    Mar 2005
    Posts
    5
    Hitachi Seiki va 40
    Fannuc 6m control.
    If you are still in LA let me know so I can contac you for service

    Thank you

  5. #5
    Registered
    Join Date
    Nov 2004
    Posts
    36
    I'm in the midwest now. your machine have the Micon 8-1 or 8-2?

  6. #6
    Registered
    Join Date
    Mar 2005
    Posts
    5
    Hi,hitachi_man
    How do i know which is 8-1 or 8-2?

    Thanh You

  7. #7
    Registered
    Join Date
    Nov 2004
    Posts
    36
    It's on the edge of the board, it will say micon 8-1 or micon 8-2.

  8. #8
    Registered
    Join Date
    Mar 2005
    Posts
    5
    It's micon 8-2.

  9. #9
    Registered
    Join Date
    Nov 2004
    Posts
    36
    What manuals are you looking for? I'll see if I have them.

  10. #10
    Registered
    Join Date
    Nov 2003
    Posts
    17

    how to reset magazine sync

    HG 400III with Seicos 10M control. Tool mag is out 5 pots. How can I reset? :cheers:
    Kirk

  11. #11
    Registered
    Join Date
    Nov 2004
    Posts
    36
    That machine should have the Micon 16 front end, to reset the tool pot you need to go into the system table and do it there. Press F1 > F4 and that will take you into the AB-Phase table. Change your pot numbers there and reboot the machine. That should take care of it.

  12. #12
    Registered
    Join Date
    Nov 2004
    Posts
    36

    Phone number change!!!

    Phone number change....[QUOTE=Hitachi_man]Hello all out there lost in the confusion of trying to find support for your Hitachi Seiki machines. I own a CNC Service Company in Wichita Kansas working on all brands of machines, but specializing in Hitachi Seiki. I currently have over 10 gig of info on Hitachi Seiki machines in my database from machine software to procedures and ELECTRICAL MANUALS!!!!! I have years of experience working with these machines, and until June of 04 I worked for Mori Seiki in LA as their Hitachi Seiki specialist. We DO travel, and my hourly rate for shop labor is only $75.00 per hour no matter what state your in. I also do phone support and provide procedures at $45.00 per hour 1 hour min....If you have a Hitachi Seiki machine, other machine models welcome also, call us and we will be happy to help!!! (curing your headaches is free!!)

    You can contact us at 316-260-6090 just ask for Josh, aka Hitachi_man

    well be looking forward to hearing from you!!!

  13. #13
    Registered
    Join Date
    May 2006
    Posts
    1

    Pallet Changer Alarm! VM50

    Good morning Josh/Hitachi Man,

    I have a vm50 with Seikos Alpha10M Control (equiped with dual pallet changer). I'm missing a Programing Manual and Instruction Manual for Optional Functions. Machine seems to be running okay except for swapping pallet. I keep having these alarms when commanding M60.

    [2AC7] Transfer Ready Indication Incomplete
    [2AD1] Pallet Position Pin in Abnormal

    I'm not sure if we had the pallet changer hooked up right because the "APC Ready" Push Button/Light never came on during the whole time and I don't know how to "Origin APC". There's a green LED flashing all the time in APC controller box (bellow/behind the pallet changer).

    We're able to MDI the APC door open, Unclamp table (which raised the table up) but unable to dock the table to its place.

    I'd like to buy above mentioned Manuals (either printed copies or PDF files) from you and need your help walking us thru solving this problem. I'll have my friend Shane (he helps setting up the machine) give you a call today. We are in Oregon.

    Thank you

    Chi Dang

  14. #14
    Registered
    Join Date
    Feb 2006
    Posts
    22
    hi hitachi man
    we have a vs50 aprox built 2003 the tool changer keeps alarming out
    when you have tools in it with no tools in it it works fine do you think
    that is somthing you could find solution for if we called you.
    thanks
    bob m

  15. #15
    Registered
    Join Date
    Nov 2004
    Posts
    36
    What alarms are you getting? Probably something that can be fixed very easily. That tool magazine, carrier fingers, and twin arm are pretty basic in both design and in/out signals. Alot of what I see happen is either the tool page or the a/b phase is out of sync. But if you can tell me what alarms you have I will have a better idea of what needs to be done.

  16. #16
    Registered
    Join Date
    Jun 2006
    Posts
    9

    Question Ho w can I releasefanuc6mb Z interlock

    Dear sir
    My machine(Hitachi seiki MG630-V) has micon8 & fanuc6mb system(built in 1982).
    I pushed emergence button during ATC working.
    After that time I can not do anything because of Z interlock.
    How can I release the Z interlock.
    If you have micon8 operating manual , Can I get 1 copy?
    Thank you

  17. #17
    Registered
    Join Date
    Feb 2006
    Posts
    22

    hitachi alarms

    hi hitachi man
    the alarms we are getting are
    2113,500,2083,2086
    hope you can help
    bob m

    george industries ny
    607-748-3371

  18. #18
    Registered
    Join Date
    Feb 2006
    Posts
    22

    Service

    hi hitachi man
    we have been trying to contact you by phone now for 2 week
    for phone support, we have had no luck.has you phone number changed.

    bob m

    george ind

    ph 607-748-3371

  19. #19
    Registered
    Join Date
    Feb 2006
    Posts
    22

    Hitachi Service

    hi does anyone know what happened to thr hitachi man
    he does not respond to forum or phone calls,or does anyone know
    of another hitachi service man.
    we have a machine down and no one to fix it.

    any help would be appreciated

  20. #20
    Registered
    Join Date
    Jul 2006
    Posts
    2

    Help on Hitachi seiki va-40

    Hi, I am Paul. i just purchased a hitachi seiki va-40, 1980 model. please show me how to get this machine up and running. I spent the whole nite, trying to clear the old numbers from the offset page by pressing CAN , then input, but nothing happen. Also, please show me how to set all the tools in, with the magazine, in order for the machine to regconize all tools. Thanks

Page 1 of 9 123

Similar Threads

  1. Did Mori Seiki Buy Hitachi Seiki?
    By Billet Sean in forum Mori Seiki lathes
    Replies: 6
    Last Post: 05-05-2011, 04:12 AM
  2. Hitachi Seiki Parts, Support and Manuals
    By npkaye in forum News Announcements
    Replies: 4
    Last Post: 03-09-2011, 12:16 PM
  3. HITACHI SEIKI MACHINES. SERVICE / TECH
    By bob1112 in forum Uncategorised MetalWorking Machines
    Replies: 6
    Last Post: 09-14-2010, 04:49 PM
  4. Hitachi Seiki tech network - support
    By bob1112 in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 12-29-2008, 10:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •