[WayKen12]

Want to learn more the best ways, you can learn more from here (https://www.waykenrm.com/technologie...ection-molding)

[Songshunsteel]

That you must truly understand what you need, that you can make the right choice. There are so many factors. Such as material, properties, product shape, and more. And H13 steel:https://steelpurchase.com/h13-12344-skd61-steel/ is a good material for injection molds.

[stebromold]

How to reduce the production cost of injection molding is a problem that injection molding manufacturers have to face. List the following three precautions that can be effectively avoided:
1. Production workshop
The layout of the production workshop is mainly considered from two aspects: on the premise of meeting the production needs, the layout is optimized according to the production process to meet the flexible energy requirements under specific production conditions
2. Injection molding machine
The injection molding machine is a big energy consumer in the injection molding workshop, among which the most prominent is the motor and heating.
3. Injection mold
The mold structure and mold state often have a great influence on the injection molding cycle and processing energy consumption
Of course, if you want to save more costs, you can choose to invest in the cost comparison place, such as China's mold manufacturing, custom plastic parts china,https://stebro-mold.com/custom-injection-moding/ is also a good choice

[kukuriga]

Overall I think just researching the market and comparing the prices should give you a good enough idea of how much you'd actually be able to reduce. Just keep in mind that the cheapest services out there, are not usually the best. With everything that I needed done I knew that the best course of action was to collaborate with actual professionals on the market and working with https://www.micromolds.eu I've never had anything to complain about. This is another tip that I have for most people, let professionals do their job and trust the process, if you want quality you need to pay for quality, there's no short route.