525,869 active members*
3,220 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > SIEMENS Sinumerik CNC controls > How to force input and output signal of Siemens Sinumerik CNC controls
Results 1 to 4 of 4
  1. #1
    *Registered User*
    Join Date
    May 2017
    Posts
    5

    How to force input and output signal of Siemens Sinumerik CNC controls

    Any one can tell me how to force input and output signal of Siemens Sinumerik CNC controls ?

    I can go to the NC/PLC Screen to type and watch any input and output signal. But to force ( change ) the value of the input and output, It need the access level. It need password.

    Please help if you know the default password for any type of CNC with Sinumerick control.

  2. #2

    Join Date
    Feb 2020
    Posts
    2
    Sunrise) is tha password of tha siemens controller. this password give manufacture you try it

  3. #3
    *Registered User*
    Join Date
    May 2017
    Posts
    5

    Re: How to force input and output signal of Siemens Sinumerik CNC controls

    Quote Originally Posted by 2759482 View Post
    Sunrise) is tha password of tha siemens controller. this password give manufacture you try it
    Thank you my friend. I can access to change value of input and output. But nothing happen. Do you know what steps I have to do to make sure when I change value of output, It will be working. For example I force output value to the valve to turn on.

  4. #4
    Junior Member
    Join Date
    Jan 2014
    Posts
    78
    Quote Originally Posted by honghaivib View Post
    Thank you my friend. I can access to change value of input and output. But nothing happen. Do you know what steps I have to do to make sure when I change value of output, It will be working. For example I force output value to the valve to turn on.
    Try to force an output that is not written/used in the logic already, see if that works

Similar Threads

  1. Mastercam X, force 4 decimal place output
    By critz in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 4
    Last Post: 07-28-2020, 06:41 PM
  2. Siemens Sinumerik CNC controls
    By gbowne1 in forum SIEMENS Sinumerik CNC controls
    Replies: 6
    Last Post: 06-25-2010, 09:33 AM
  3. 1.6V-3.0V random signal voltage parallel signal from output – Any advice?
    By cjchands in forum Mach Software (ArtSoft software)
    Replies: 0
    Last Post: 11-12-2009, 11:36 AM
  4. PMC force signal
    By yepingapple in forum Fanuc
    Replies: 3
    Last Post: 10-21-2009, 06:50 AM
  5. Input/output signal on 0M-C
    By padobranac in forum Fanuc
    Replies: 3
    Last Post: 10-28-2008, 03:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •