587,006 active members*
3,275 visitors online*
Register for free
Login
IndustryArena Forum > CNC Plasma, EDM / Waterjet Machines > Hypertherm Plasma > HPR400XD - Bevel test cut comes up short
Results 1 to 2 of 2
  1. #1
    Join Date
    May 2024
    Posts
    1

    HPR400XD - Bevel test cut comes up short

    My test cut comes up short so I can’t proceed cutting the actual parts. Anyone know what to do to fix this issue? Test part is programmed 100mm x 100mm but the outcome is 100x97 mm short on the bevel side (+45 knife bevel). Please help. Thanks!

  2. #2
    Join Date
    Apr 2016
    Posts
    20
    Quote Originally Posted by Osang View Post
    My test cut comes up short so I can’t proceed cutting the actual parts. Anyone know what to do to fix this issue? Test part is programmed 100mm x 100mm but the outcome is 100x97 mm short on the bevel side (+45 knife bevel). Please help. Thanks!
    If your control allows add additional material offset.
    I find keeping long point on top of plate when possible gives more accurate results. Also cutting square sides last.

Similar Threads

  1. Bevel on plasma cut parts
    By Bradnicent in forum CNC Plasma / Oxy Fuel Cutting Machines
    Replies: 0
    Last Post: 02-01-2019, 12:59 PM
  2. Test travel comes up short
    By rcheli in forum LinuxCNC (formerly EMC2)
    Replies: 4
    Last Post: 03-20-2018, 04:12 PM
  3. Blind Bevel cut
    By 17kennyr in forum Hypertherm Plasma
    Replies: 0
    Last Post: 01-15-2015, 12:50 PM
  4. No a smooth cut and need to add bevel
    By nambass in forum Vectric
    Replies: 5
    Last Post: 03-11-2014, 02:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •