535,108 active members*
2,802 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > Hurco KM3 MAX32 Failure
Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Dec 2020
    Posts
    1

    Hurco KM3 MAX32 Failure

    Hello All

    I have a Hurco KM3 Max32 (V1.30) which has not missed a beat since I got it in 2005 or so ... until now.
    When first fired up and it starts to load the Executive and error message appears "Security device is invalid or has failed". Hurco US is no help because of the age of the machine. I do not know if the failure is the hard drive or electronic.

    Tried booting from the floppy but that only gives me a few alpha-numeric characters on the left screen up right corner, so I think my backups are bad or the floppy drive needs help.

    Anyone have any ideas on what went wrong and how can I fix it?

    I do not have a boat and certainly do not need a 3000 pound boat anchor.

    Thanks
    Dave

  2. #2
    Registered
    Join Date
    Jun 2008
    Posts
    1045

    Re: Hurco KM3 MAX32 Failure

    Sounds like the parallel port dongle has gone buns-up.
    Where are ya?

  3. #3
    Member
    Join Date
    Apr 2019
    Posts
    57

    Re: Hurco KM3 MAX32 Failure

    Security if invalid check usb or serial dongle

    Išsiųsta naudojantis SM-G960F Tapatalk 4 Lt

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •