Register for free
Login
487,765 reg. members
487,765 reg. members
Results 1 to 7 of 7
  1. #1
    antoniomasat
    Guest

    I have a problem with my VM1 Hurco machine

    I had the battery fail CMOS problem and the CMOS Checksum error, I'd replace the RTC battery with the Dallas module replacement and the battery alarms dissapear, I can modify the BIOS setting, but now I have this problem the machine stay in this message Verifying DMI Pool Data and don't start, I have several floppy disks, but I don`t have the manual to know how restore the complete system.

    Someone could help me please?

    I need to restore all system or I can save the original hard disk?

    Thanks in advance for your help!

  2. #2
    Registered
    Join Date
    Jun 2008
    Posts
    953

    Re: I have a problem with my VM1 Hurco machine

    Sounds like you have the wrong CMOS settings for the hard disk. What did you set it as?

  3. #3
    antoniomasat
    Guest

    Re: I have a problem with my VM1 Hurco machine

    I'd only change the boot sequence, starts with C, same fail, starts with D same fails, exists more settings to do?

  4. #4
    Registered
    Join Date
    Jun 2008
    Posts
    953

    Re: I have a problem with my VM1 Hurco machine

    What are the hard drive settings?
    Cylinders, heads, sectors?
    LBA?

  5. #5
    antoniomasat
    Guest

    Re: I have a problem with my VM1 Hurco machine

    ahh, it's in auto detection mode, but they are LBA 117, 231, 408, 60GB M5_P1

  6. #6
    Registered
    Join Date
    Jun 2008
    Posts
    953

    Re: I have a problem with my VM1 Hurco machine

    Set them in CHS
    3303 cyl
    16 heads
    Wpcom 65535
    lzone 0
    63 sectors

    Then change to LBA

  7. #7
    antoniomasat
    Guest

    Re: I have a problem with my VM1 Hurco machine

    Ok I'll try it, thanks for your help!

Similar Threads

  1. Hurco BMC 30 problem
    By EngHassan in forum OpenSource Software
    Replies: 0
    Last Post: 02-27-2017, 05:28 PM
  2. G42 Hurco problem
    By macca5 in forum HURCO
    Replies: 1
    Last Post: 04-01-2013, 07:12 PM
  3. hurco km3 problem
    By junaid.wahid in forum HURCO
    Replies: 2
    Last Post: 11-17-2008, 09:26 AM
  4. HURCO ATC problem
    By jawwad in forum Machine Problems, Solutions , Wireless DNC, serial port
    Replies: 0
    Last Post: 11-09-2006, 08:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •