592,217 active members*
5,401 visitors online*
Register for free
Login
IndustryArena Forum > OpenSource CNC Design Center > Open Source Controller Boards > I need help with a servo driver project. YAPSC 10v

Thread: I need help with a servo driver project. YAPSC 10v

Results 1 to 2 of 2
  1. 09-14-2024, 09:51 PM #1
    newhumanoid
    newhumanoid is offline
    Join Date
    Sep 2024
    Posts
    2

    I need help with a servo driver project. YAPSC 10v

    Gentlemen, an unfortunate situation. I had a homemade CNC machine made of plywood. The control unit was on YAPSC and AMC. I made a new machine out of aluminum and wanted to transfer the electronics to it... The HDD crashed, along with all the information and software. It turned out that there were no backups. I need at least the tuning and configuration software. Ideally, the entire project. Maybe someone still has the information. Or perhaps someone knows where the project can be downloaded. Unfortunately, the author's website is down.
    I would be very grateful.
    Reply With Quote Reply With Quote
  2. 09-15-2024, 01:12 PM #2
    newhumanoid
    newhumanoid is offline
    Join Date
    Sep 2024
    Posts
    2

    Re: I need help with a servo driver project. YAPSC 10v

    I found a link to the project archive. https://dropmefiles.net/ru/Q78eP
    Maybe it will be useful for someone too.
    And I’ll duplicate the archive onto my disk https://drive.google.com/file/d/17Qm...ew?usp=sharing
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. YAPSC:10V : The glue between Step/dir and +/-10V servo amp
    By MaX-MoD in forum Open Source Controller Boards
    Replies: 259
    Last Post: 05-20-2024, 06:22 AM
  2. Anyone know of a Break out Board with ISOLATED 0-10v spindle driver
    By dioggio in forum CNC Machine Related Electronics
    Replies: 4
    Last Post: 03-26-2022, 01:52 AM
  3. Problems with stepsignals to driver, UC300eth - CP0-10V
    By nikdan in forum UCCNC Control Software
    Replies: 13
    Last Post: 12-28-2017, 02:17 PM
  4. Servo +/- 10V controll test
    By Tycho de Brahe in forum CNC Machine Related Electronics
    Replies: 3
    Last Post: 06-08-2014, 12:04 AM
  5. How to drive Analog Servo Input +/- 10V
    By gurvy in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 05-31-2007, 05:31 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules