530,019 active members*
3,181 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1

    Join Date
    Sep 2020
    Posts
    2

    Johnford vmc-1324 parameters

    Looking for a source for the 900 parameters for my johnford vmc-1324 with fanuc o-mc control. Batteries corroded after 9 months and lost parameters. I do have all parameters except 900's. Always replace my batteries with new supposedly premium batteries yearly. Looks like I am going to energizer now. Any help would be appreciated.

  2. #2
    Registered
    Join Date
    Apr 2011
    Posts
    647

    Re: Johnford vmc-1324 parameters

    Here is what I have I only know that it was from a Johnford vertical mill. You need to use alkaline batteries. And once you get your options parameters set press and hold the EOB key when you punch them out as this will allow the 900 to be saved with the rest of the parameters.

  3. #3

    Join Date
    Sep 2020
    Posts
    2

    Re: Johnford vmc-1324 parameters

    Quote Originally Posted by drdos View Post
    Here is what I have I only know that it was from a Johnford vertical mill. You need to use alkaline batteries. And once you get your options parameters set press and hold the EOB key when you punch them out as this will allow the 900 to be saved with the rest of the parameters.
    It is a start. not correct but may be able to figure it out from there. Thank You.

Similar Threads

  1. Johnford OT 25 Parameters
    By Antonio Arguijo in forum Fanuc
    Replies: 0
    Last Post: 02-17-2016, 03:42 AM
  2. Looking for Johnford 850 help including parameters
    By elvicash in forum General Waterjet
    Replies: 2
    Last Post: 12-13-2015, 04:14 PM
  3. Johnford parameters
    By kenlo14 in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 04-26-2013, 08:02 PM
  4. parameters for Johnford sv-32
    By ronwhtgmc in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 02-10-2012, 08:04 PM
  5. Need Johnford 850 help including parameters
    By elvicash in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 03-28-2008, 02:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •