I have a Kia 31II with the Yasnac LX3 controller. AL-20 Tool Post Position Error....Any ideas. Thanks.
I have a Kia 31II with the Yasnac LX3 controller. AL-20 Tool Post Position Error....Any ideas. Thanks.
AL-20 is on a drive ? what kind of drive you have
There should be a procedure to "Zero setting of the turret" with your maintenance manual. Iam not too sure about this control. But it goes like this. "Turret unclamp" => Rotate the turret disc & match the markings => "Turret clamp".