All, I am new to this site so please provide constructive input. I support a machine shop that has a Kuraki KBT-13 with a Fanuc M15A14 controller. In troubleshooting for a communications fault I managed to wipe the controller memory. I lost the parameters and the PMC code as well. I a looking for anyone with the same or similar machines with the Fanuc M15 controller that would be willing to send me their parameters and their PMC code. The plan would be to try to install both and at least get it to boot and then I can go from there.
Before anyone says it, yes I made a big mistake and no I do not have any backups other than a hardcopy of the PMC code. In trying to free up the COM port due to PC-PMC comms issues I inadvertently cleared the memory. I do not have a hardcopy or soft copy of the parameters.
I also do not have the Fanuc software to recreate the PMC code and download it to the controller.

I have tried contacting DMG, who bought Kuraki, but they do not have anything they say. I am still seeing if I can get them to look at any of the information they got from Kuraki.

Unfortunately, it does not have a name plate with model and serial number.

Thanks in advance.