593,374 active members*
7,202 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Join Date
    Oct 2024
    Posts
    4

    Leadwell V-30 Help !

    Hello. I am Ahmet from Turkey. I have a "Leadwell V-30" CNC milling machine, and the control unit is "Fanuc Series 18-M." While cleaning, I am getting "506 Over Travel," "507 Over Travel," and "417 Servo Alarm" errors on the machine. I think I may have messed up the parameters as well. Is there anyone who can help me fix the machine? Additionally, I am using AI to write this message because my English is not very good. I apologize for any typos. One last thing: if this discussion belongs in a different place, please let me know.

    E-Mail: [email protected]

    Thank you in advance.

  2. #2
    Join Date
    Oct 2024
    Posts
    4

    Re: Leadwell V-30 Help !

    Hello, it's me again.

    I noticed that the parameters section of the machine has been reset. Since I didn't take a backup, I'm in a difficult situation right now. Could you assist me with this?

    Have a good day!

  3. #3
    Join Date
    Oct 2024
    Posts
    4

    Re: Leadwell V-30 Help !

    Hello. These are the pictures of my counter. I still need help with support.

  4. #4
    Join Date
    Dec 2015
    Posts
    188

    Re: Leadwell V-30 Help !

    Please contact ozhan in turkey +905355754657 he solves the problem

  5. #5
    Join Date
    Oct 2024
    Posts
    4

    Re: Leadwell V-30 Help !

    Hello everyone. I found the machine parameters, but since it is a "Fanuc 18-M" unit, we had to load them through the back of the machine using an "SRam" card. We couldn't communicate via "RS 232" because of an issue with the machine's communication system. We called for service, but it’s very hard to find an "SRam" card where I am. A service team came from another district, and the issue was resolved. I had wanted to try my luck by emailing the factory, but the local service teams here told me that I wouldn’t be able to get one. Once the parameter loading process was complete, the authorized service in my country provided the parameters via email. Thank you, my friends, for your help. I really appreciate it.

  6. #6
    Join Date
    Oct 2024
    Posts
    1

    Re: Leadwell V-30 Help !

    HI I HAVE A LEADWELL V30 MANUFACTURED IN 2000, I CURRENTLY HAVE THE SPINDLE BEING REFUIRBISHED AND THE AMOUNT OF SPACERS AND WASHERS THAT CAME OUT DOESNT MATCH THE DRAWINGS I HAVE. WONDERING IF ANY BODY HAS EXPERIENCE THIS OR HAD A NEWER VERSIOPN OF DRAWINGS THAT MIGHT EXPLAIN THE ISSUE IM HAVING,
    CHEERS

Similar Threads

  1. Leadwell v40
    By hosamsoft in forum Tormach Personal CNC Mill
    Replies: 2
    Last Post: 02-21-2023, 06:26 PM
  2. Leadwell, fanuc O-T help!
    By Vegabond in forum Fanuc
    Replies: 82
    Last Post: 02-19-2019, 03:40 AM
  3. Leadwell mcv-op
    By tman243 in forum Complaints and Praise Discussions
    Replies: 0
    Last Post: 01-04-2019, 09:06 AM
  4. Leadwell VMC-OP
    By CS900 in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 03-29-2013, 10:50 PM
  5. Leadwell v-40
    By gaza2 in forum Vertical Mill, Lathe Project Log
    Replies: 0
    Last Post: 02-12-2011, 03:52 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •