Hello,
i put a scheme of what i want to do :
I bougth a piece of card (Z80, CPU683 68EC020 PLC Tecnos system and input / output) for upgrade my cnc Master Project 323 who's working correctely with his old system under Dos ... but not very easy to use
These cards was working into a Masterwood Project 309 retrofitted
I replace old card (68000 named 681) by 683
and Z80 Si_89 by Si_96
I wonder if someone could help me to introduce good parameter to make it working ?
Regards, GLP
Attached Thumbnails
with some photos of retrofit of the Masterwood :
this new CPU3-2M CPU68EC020-2003-01 (31SFC104640) card
will replace the older CPU1 (68000) KTC91
new
old
The old I/O cards (ACCTC90/02) will be replaced by new I/O cards 61SFA300101 (ASSI_CC_2007_01)
The communication interface Si2.5 is replaced too by SFS10150 SI_96_01 (31SFS101460)
and RamDisk Card is suppressed because no need anymore
the software MasterWork drive everything
To be followed