529,917 active members*
2,121 visitors online*
Register for free
Login
IndustryArena Forum > Machinery Manual, Brochure / Photo Archives > Machinery Manuals / Brochures > Mazatrol EIA-Dash (IMAC-LT) and IMAC-TP service manual
Results 1 to 8 of 8
  1. #1
    Registered
    Join Date
    Aug 2014
    Posts
    9

    Mazatrol EIA-Dash (IMAC-LT) and IMAC-TP service manual

    Mazatrol EIA-Dash (IMAC-LT) and IMAC-TP service manual, which is used in the QuickTurn 200C lathe, among other machines.

    It refers to the 05-mainboard, 05-servo amplifier board, MSVA, MSVB servo amplifier board series.

    For anyone who needs this information.

    Regards

  2. #2
    Registered
    Join Date
    Oct 2008
    Posts
    23

    Re: Mazatrol EIA-Dash (IMAC-LT) and IMAC-TP service manual

    I have a Mazak QT6 with gantry. Turns out it runs on "Mazatrol EIA Dash" I'm new to this, how do I program this machine? Is there a CAM program to feed it into the serial port on the machine?

    Attachment 363426
    Attachment 363428
    Attachment 363430
    Click image for larger version. 

Name:	20170526_105856_1495821645330_resized.jpg 
Views:	2 
Size:	63.2 KB 
ID:	363432

  3. #3
    Registered
    Join Date
    Oct 2008
    Posts
    23

    Re: Mazatrol EIA-Dash (IMAC-LT) and IMAC-TP service manual

    Thanks IEC79! In my hunt for EIA Dash I stumbled over the service manual. I finally figured it is G-Code with some Mazak quirkiness. I am hopeing that HSMX can post process my SolidWorks file. On another forum they said EIA Dash was a Mazak low spec controller? Seems no one had seen it as a stand alone on a QT-6. I am hoping I can figure how to control the GL-6 gantry also.

  4. #4
    Registered
    Join Date
    Oct 2008
    Posts
    23

    Re: Mazatrol EIA-Dash (IMAC-LT) and IMAC-TP service manual

    From my research it looks like virtually all MAZAK QT-6G(Gang Tooling) were EIA-Dash Controlls

  5. #5
    Registered
    Join Date
    Apr 2006
    Posts
    55

    Re: Mazatrol EIA-Dash (IMAC-LT) and IMAC-TP service manual

    Could you share me the parameter file? thank you very much.

  6. #6
    Member
    Join Date
    Aug 2020
    Posts
    72

    Re: Mazatrol EIA-Dash (IMAC-LT) and IMAC-TP service manual

    OMG! This manual just saved my butt! I know this is a really old post, but I wonder if you have the programming /NC operating manual for this controller too?

  7. #7
    Registered
    Join Date
    Dec 2012
    Posts
    351

    Re: Mazatrol EIA-Dash (IMAC-LT) and IMAC-TP service manual

    Hey ashes-man,

    Here you find manuals for the most common brands:

    Mazak Manuals User Guides - CNC Manual

  8. #8
    Member
    Join Date
    Aug 2020
    Posts
    72

    Re: Mazatrol EIA-Dash (IMAC-LT) and IMAC-TP service manual

    Quote Originally Posted by Heavy_Metal View Post
    Hey ashes-man,

    Here you find manuals for the most common brands:

    Mazak Manuals User Guides - CNC Manual
    Damn, how did I not know about that after all the googling I have done!!! Thanks. Unfortunately there are no manuals that reference this controller. All are newer or the Mitsubishi based ones. I will put a question up and see if someone has one now that I finally know what the controller is!

Similar Threads

  1. Mazatrol EIA Dash control Illegal Interupt Error.
    By cinman in forum Mazak, Mitsubishi, Mazatrol
    Replies: 2
    Last Post: 05-05-2019, 03:36 PM
  2. Anyone successfully running V27 on iMac?
    By gd.marsh in forum BobCad-Cam
    Replies: 6
    Last Post: 04-18-2015, 08:46 AM
  3. Roland cx-24 on a iMAC and in MINT
    By kd5rcx in forum Community Club House
    Replies: 0
    Last Post: 12-21-2013, 10:06 PM
  4. SolidWorks 2011 on an iMac
    By BanduraMaker in forum Solidworks
    Replies: 12
    Last Post: 01-26-2013, 03:50 PM
  5. Imac and Torchmate
    By Harb in forum Torchmate
    Replies: 4
    Last Post: 04-27-2011, 01:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •