504,500 active members
3,571 visitors online
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Registered
    Join Date
    Oct 2013
    Posts
    40

    Meldas M0 Controll

    Hello All,
    i have a CNC Machining center of Leadwell MCV 550E with Meldas M0 Control when i buy this machine there is no parameters in it but machine builder original parameters was in the CD and parameters book.i have put the parameters the the machine alarm was removed no alarm on the screen.but axis are not moving any one can tell me that what can i do to remove my problem.Is there any lock parameters or some thing other?
    please help me

  2. #2
    Registered
    Join Date
    Jan 2009
    Posts
    33

    Re: Meldas M0 Controll

    Hello, I have the exact same machine that I have been running for over 15 years now and may be able to help. Did you do a ram clear when you powered it up? And did you enter all of the parameters in the parameter pages and the machine parameter screens? There's a lot of parameters to put in. The machine parameters are hidden by entering a code of 1's and 0's on one of the alm /dia pages. Is there any power to the drives and what lights are displayed on them? Some pictures of the drives and pages might be helpful.

  3. #3
    Registered
    Join Date
    Oct 2013
    Posts
    40

    Re: Meldas M0 Controll

    Thank you ferret
    i was hopeless because no one was replying me about my problem can u tell me that how can i enter the code?can i enter 1,s or 0,s in diagnostic page?and do u have diagnostic parameters?plz help me thanks

  4. #4
    Registered
    Join Date
    Jan 2009
    Posts
    33

    Re: Meldas M0 Controll

    Do you have the original machine parameters book? That will help to know what to set the controls to. PM me your email and I will send you some tech sheets that I have.

  5. #5
    Registered
    Join Date
    Oct 2013
    Posts
    40

    Re: Meldas M0 Controll

    yes i have original parameters book and manuals of this machines
    i shall be thankfull to you if you help me
    cnc_engr@yahoo.com

  6. #6
    Registered
    Join Date
    Aug 2017
    Posts
    8
    Quote Originally Posted by braided View Post
    Hello All,
    i have a CNC Machining center of Leadwell MCV 550E with Meldas M0 Control when i buy this machine there is no parameters in it but machine builder original parameters was in the CD and parameters book.i have put the parameters the the machine alarm was removed no alarm on the screen.but axis are not moving any one can tell me that what can i do to remove my problem.Is there any lock parameters or some thing other?
    please help me
    I have the same problem, it does not show alarms, the axes do not move, did you solve your problem?

Similar Threads

  1. TX8 controll
    By desmond4518 in forum Controller & Computer Solutions
    Replies: 7
    Last Post: 08-25-2017, 11:29 AM
  2. LVD MNC 8000 CONTROLL
    By Tom Bayler in forum Community Club House
    Replies: 0
    Last Post: 08-12-2013, 01:00 PM
  3. DIY controll box statup
    By rbs in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 06-15-2011, 09:55 AM
  4. controll velocity
    By edris in forum G-Code Programing
    Replies: 1
    Last Post: 09-04-2009, 04:46 PM
  5. Where to set G54 position for 6T controll.
    By blakemachine in forum Fanuc
    Replies: 4
    Last Post: 02-09-2009, 02:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •