556,800 active members*
2,376 visitors online*
Register for free
Login
Results 1 to 7 of 7
  1. #1

    Join Date
    Apr 2020
    Posts
    3

    Mk2/4 and CNC USB Controller

    In 2013, I purchased the MK2/4 controller and software for it.
    The controller was purchased as a spare part and did not participate in the operation of the equipment, that is, it has a new condition.
    In the failure of the previous controller, I tried to use MK2 / 4, but the CNC USB Conrroller software offers "Please upgrade firmware to version 20141103" and then "Firmware update FAILED! (Unknownl)".

    The controller did not work all this time and the possibility of its failure is minimal.
    Controller number 04377, purchased 2013-03-04 invoice 96/2013,
    Software purchased May 23, 2013 via PayPal Transaction ID: 2J964592FN896863R

    The key was received by your letter from 2013-05-25, the controller was successfully verified.
    Is it possible to solve this problem or the controller just failed?

  2. #2
    Registered
    Join Date
    May 2008
    Posts
    266

    Re: Controller not verified

    I don't think TNG works with anything other than 3 series boards.

  3. #3

    Join Date
    Apr 2020
    Posts
    3

    re: Mk2/4 and CNC USB Controller

    Not TNG, just CNC USB Controller software. The name of the thread is wrong.

  4. #4
    Administrator burs's Avatar
    Join Date
    Apr 2019
    Posts
    127

    Re: Mk2/4 and CNC USB Controller

    Not TNG, just CNC USB Controller software. The name of the thread is wrong.
    done

  5. #5
    Moderator
    Join Date
    Mar 2017
    Posts
    1023

    Re: Mk2/4 and CNC USB Controller

    Please contact our support email about firmware update.

  6. #6

    Join Date
    Apr 2020
    Posts
    3

    Re: Mk2/4 and CNC USB Controller

    Quote Originally Posted by PlanetCNC View Post
    Please contact our support email about firmware update.
    Ok! Please check yours mail address from autoinformer:

    "Thank you for contacting us.

    A request for support has been created and assigned ticket.
    You should receive an email with ticket number shortly. Check your spam email.
    If you did not receive ticket number then login to our support center at PlanetCNC Support Center
    or send email to support@planet.cnc.com."

    support@planet.cnc.com !

  7. #7

    Re: Mk2/4 and CNC USB Controller

    I have the same issue, upgraded my Mill and downloaded new software and when I plug it in, it says to update the firmware.
    I say ok it does something and then says firmware update failed unknown reason (1)
    I’ve tried everything I can find online but no luck, how do I do this as I don’t want to buy a new controller when I haven’t even bin able to use this one since I bought it

Similar Threads

  1. Replies: 0
    Last Post: 07-24-2017, 05:33 PM
  2. Replies: 3
    Last Post: 01-10-2016, 04:21 PM
  3. DIY Controller laser Arduino Vs Controller general (mach3)
    By jorgeluis in forum Laser Hardware
    Replies: 0
    Last Post: 09-03-2015, 12:22 AM
  4. Replies: 4
    Last Post: 11-07-2009, 06:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •