600,838 active members*
3,358 visitors online*
Register for free
Login

Thread: MK2/4 issue

Results 1 to 1 of 1
  1. 03-21-2025, 09:04 AM #1
    snap1202
    snap1202 is offline Member
    Join Date
    Dec 2009
    Posts
    6

    MK2/4 issue

    Hello,

    i have the following problem iam looking for some support.
    I have an old MK2/4 controller that somehow is apparently recognized as MK2 instead of Mk2/4 after an update.

    Can someone help me with getting back the MK2/4 firmware onto it.
    The problem is that when its recognized as MK2 the limit pins 1-4 cant be used for XYZA
    as they are apparently XXYYZZAA on the mk2 as far i was able to find out.

    Thanks for your help.
    Reply With Quote Reply With Quote
  2. 03-22-2025, 07:36 PM #2
    PlanetCNC
    PlanetCNC is offline Moderator
    Join Date
    Mar 2017
    Posts
    1390

    Re: MK2/4 issue

    There is no difference in firmware between Mk2 and Mk2/4.
    There is a setting that will change XXYYZZAA to XYZA
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules