549,843 active members*
2,018 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1

    Join Date
    Jan 2022
    Posts
    2

    MultiCam 3000

    motor fault (0x 1) XA Drive 1-faulted Axis 0 3000_545_3422_XA Count 9: Drive is OK Safety stop basis: Bad hall

    I keep getting this message at startup. Any thoughts

  2. #2
    Registered
    Join Date
    Jun 2005
    Posts
    1392

    Re: MultiCam 3000

    This message seems to suggest you have a loose or perhaps a Hall effect homing sensor that is going bad.

  3. #3

    Join Date
    Jan 2022
    Posts
    2
    Quote Originally Posted by CNCMAN172 View Post
    This message seems to suggest you have a loose or perhaps a Hall effect homing sensor that is going bad.
    Excellent, thanks for the info. When I try to home the machine, at startup, it almost appears to try to make a rapid move then stops. I can see the Y and Z axis move, then the X axis starts to travel and that’s it….shut down. Thank you for your help.

  4. #4
    Registered
    Join Date
    Jun 2005
    Posts
    1392

    Re: MultiCam 3000

    Quote Originally Posted by Rusty48 View Post
    Excellent, thanks for the info. When I try to home the machine, at startup, it almost appears to try to make a rapid move then stops. I can see the Y and Z axis move, then the X axis starts to travel and that’s it….shut down. Thank you for your help.


    This happens because the controller starts to home and sees that the home sensor a hall effect sensor has fired meaning it is already there to it stops motion. Check the hall effect sensor on the X axis. It is either bad or it is loose and near a piece of metal causing the problem. They are not that expensive you could order a new on and you would be in good shape.

    Russ

Similar Threads

  1. Multicam 3000 Modbus 1/20
    By CnScott in forum Multicam Machines
    Replies: 1
    Last Post: 12-23-2021, 12:39 AM
  2. Multicam 3000 shutdown
    By Lilgedahl in forum DNC Problems and Solutions
    Replies: 16
    Last Post: 10-27-2018, 07:52 PM
  3. multicam 3000 parts
    By holykatz in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 05-26-2016, 09:36 AM
  4. Multicam 3000 help anyone?
    By murfeedean in forum Multicam Machines
    Replies: 9
    Last Post: 05-22-2013, 05:02 PM
  5. Need help MultiCam 3000 machine
    By Speedcab in forum Multicam Machines
    Replies: 4
    Last Post: 03-10-2012, 04:04 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •