545,502 active members*
2,206 visitors online*
Register for free
IndustryArena Forum > CNC Electronics > Dmm Technology > Multicam retrofit journey
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2011

    Multicam retrofit journey

    Enjoying this retrofit so much i just have to share my experience. Im finally retrofitting my multicam router with some dmm servos,new ballscrews(in the mail),blocks, refurbished spindle and controller. The servos are fitted with the multiturn absolute encoders using batterypacks on the cable.

    In the end of the video before i removed the original stepper motor you can see the difference in size, maybe just me but dang dats hawt.


  2. #2
    Join Date
    Sep 2014

    Re: Multicam retrofit journey

    How difficult was mounting the gearbox with this rack and pinion? Did you mount it where the large 9 inch pulley was?

Similar Threads

  1. Old multicam mg205 retrofit
    By motogeeking in forum Multicam Machines
    Replies: 2
    Last Post: 06-10-2019, 10:09 PM
  2. Multicam 610 retrofit
    By Panovak in forum Multicam Machines
    Replies: 3
    Last Post: 02-17-2019, 06:49 PM
  3. Multicam Router Retrofit/Rebuild
    By motogeeking in forum Videos
    Replies: 0
    Last Post: 06-26-2017, 02:13 AM
    By orkh in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 11-26-2009, 09:55 AM
  5. Replies: 4
    Last Post: 07-03-2007, 02:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts