Manual Guide i is a software with ergonomic operating characteristics that FANUC has researched in depth. The software is based on the ISO programming code format and completes component programming through a graphical operating interface and guided operating steps. The software has a comprehensive operation interface, and all important operations are concentrated on one interface (as shown in the figure below), avoiding repeated switching operations; and the ISO processing program and CAD/CAM software generated by CAD/CAM software can be directly used, which has good compatibility. Its biggest feature is that it has powerful program editing functions, supports a variety of machining cycle programs, and can perform machining simulation on the program to facilitate verification.

Regarding the introduction of NC GUIDE PRO software, you can view it through the web page FANUC NC Guide/NC GuidePro software