504,473 active members
3,116 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > BobCad-Cam > Bobcad Post Processors > Need BobCad V30 post for Milltronics Centurion 7
Results 1 to 4 of 4
  1. #1

    Join Date
    Jun 2019
    Posts
    1

    Need BobCad V30 post for Milltronics Centurion 7

    Need some help please. G-code generated by the post processor I have will not cut a straight line from point A to point B. For example, if a line is programmed to start at point A (X 0.000”, Y 0.000”) and travel to point B (X 10.000”, Y 0.000”) the resulting line will be skewed off by some amount. The resulting line may give a point ending at C (X 10.000”, Y 0.200”). This error occurs in both X and Y directions of travel with unpredictable outcomes. Talked with folks at Bobcad,but they say it will take 2-4 weeks to modify a post for me.

    Anyone have a post they can share?

  2. #2
    Junior Member
    Join Date
    Feb 2013
    Posts
    659

    Re: Need BobCad V30 post for Milltronics Centurion 7

    Does the post processor actually create the values X 10.000”, Y 0.200” in the code?

  3. #3
    Registered
    Join Date
    Mar 2017
    Posts
    61

    Re: Need BobCad V30 post for Milltronics Centurion 7

    Are you using cutter comp? You have to have a lead in.

    Sent from my SM-N960U using Tapatalk

  4. #4
    Registered
    Join Date
    Mar 2017
    Posts
    61

    Re: Need BobCad V30 post for Milltronics Centurion 7

    Also i have a post processor for bobcad v30

    Sent from my SM-N960U using Tapatalk

Similar Threads

  1. Post Processor for Centurion V milltronics
    By holeshot in forum Dolphin CADCAM
    Replies: 1
    Last Post: 02-05-2016, 05:29 PM
  2. centurion 6 MB19 Milltronics Post help
    By j65giles in forum Milltronics
    Replies: 3
    Last Post: 11-09-2014, 01:09 AM
  3. Replies: 3
    Last Post: 03-27-2010, 03:47 AM
  4. Need post for Milltronics / Centurion 7 mill
    By hoganj in forum CamWorks
    Replies: 1
    Last Post: 03-25-2010, 10:05 PM
  5. Gibbs Post needed for Milltronics w/ Centurion Vii
    By ABCOTIM in forum Post Processor Files
    Replies: 0
    Last Post: 10-08-2008, 04:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •