562,487 active members*
3,673 visitors online*
Register for free
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > NEED HELP Matsuura MC-1000V with Fanuc 11M
Results 1 to 2 of 2
  1. #1
    Neuer Benutzer
    Join Date
    Feb 2013

    NEED HELP Matsuura MC-1000V with Fanuc 11M

    We always have issues with out ATC but we were able to run switching tools manually. We were running and the e-stop was hit by mistake. We turned the machine back on and none of the axis will move. On the readout at the ATC on the side of the machine we have error 56. "The ATC arm is off the ATC position, and NC interlock is applied or intermediate ATC arm is not at home position." . There are no alarms on the control. So the head is down and we don't know where to go from here. Is there a way to reset the tool changer?

    Any help would be appreciated.

  2. #2
    Join Date
    Apr 2012

    Re: NEED HELP Matsuura MC-1000V with Fanuc 11M

    "56" from the manual says to refer to "63" and "64" for explanation.
    "64" says to operate the INTERMEDIATE-ARM by the panel below the tool magazine. There are LED's indicating position of the mechanisms.

Similar Threads

  1. Replies: 28
    Last Post: 07-15-2018, 11:20 PM
  2. Replies: 8
    Last Post: 07-17-2017, 07:06 PM
  3. Matsuura MC-1000vs with Fanuc 11M control HELP
    By sboyle in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 07-01-2013, 12:10 PM
  4. Matsuura ES-1000V Lube ?
    By LuckyDogMe in forum CNC Machining Centers
    Replies: 1
    Last Post: 06-23-2010, 04:33 PM
  5. Matsuura MC-1000V with Fanuc 6B
    By bakarack in forum Fanuc
    Replies: 0
    Last Post: 02-20-2008, 09:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts