527,808 active members*
1,543 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Oct 2017
    Posts
    4

    Need help or advice Eltro Pilot M

    Hi guys, I have problem with Eltropilot M NC, screen is blank and I can only get some numbers on it when I switch "Diagnose" button inside of cabinet.
    There is also Ergidata ED-C/Z module on in.
    Machine is Gildemeister MD3s from 1983.There is no electrical drawings,if anyone can share I would be grateful.

  2. #2
    Member
    Join Date
    Sep 2020
    Posts
    2

    Re: Need help or advice Eltro Pilot M

    hi dear , i have same problem with my machine.beside that i don't have the cataloge. how can i find it . i also need the electrical drawings as well. i will be so happy if you help me.

Similar Threads

  1. Gildemeister CTX400 Eltro Pilot Keypad
    By flynno83 in forum Controller & Computer Solutions
    Replies: 1
    Last Post: 08-12-2015, 03:54 PM
  2. About to take the path pilot plunge, any advice?
    By CadRhino in forum Tormach PathPilot™
    Replies: 4
    Last Post: 05-29-2015, 04:29 AM
  3. Pilot Pro By PDJ
    By hacksaw44 in forum Open Source CNC Machine Designs
    Replies: 1
    Last Post: 08-10-2013, 04:28 AM
  4. Pilot CNC
    By woodworker2 in forum Commercial CNC Wood Routers
    Replies: 1
    Last Post: 03-19-2013, 06:34 PM
  5. PDJ Pilot Pro
    By hacksaw44 in forum DIY CNC Router Table Machines
    Replies: 8
    Last Post: 07-28-2012, 07:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •