535,471 active members*
4,516 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > BobCad-Cam > Need Help! Problem to make a toolpath without segments
Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jan 2021
    Posts
    1

    Unhappy Need Help! Problem to make a toolpath without segments

    We are trying to use Bobcad-Cam V30 for our production.
    The problem here is that application compute the toolpath of a straight line or radius into many segments.
    Is there any way to fix the the issue? Or, is there any setting that we can edit it?
    Attached Thumbnails Attached Thumbnails Screen Shot 2021-01-07 at 9.41.17 AM.jpg  

  2. #2
    Registered
    Join Date
    Mar 2009
    Posts
    1394

    Re: Need Help! Problem to make a toolpath without segments

    what prevents you from CAM'ing manually? Can you attach the picture of the part?

  3. #3

    Re: Need Help! Problem to make a toolpath without segments

    Usually the result of broken geometry or not having "use Curves" turned on.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •